Video Servers (IP Transmission) / Video Encoders  (521)

RIVA RE4100 is a 4 channel network video encoder with onboard video analytic 4 audio inputs, 1 audio output and 4 digital inputs / outputs Resolution: D1, 4CIF, 2CIF, VGA, CIF, QVGA, QCIF Supports ONVIF protocol.

VideoJet 8008 is Bosch's high-end, multi-stream Video-over-IP CCTV network-based video surveillance encoder.  It delivers the highest quality real-time video available today and its hardware engine produces 25 images per second of pure MPEG-4 video in DVD-like quality.  This 19-inch rack-mount single unit incorporates multiple encoders delivering eight full-motion video channels, with each channel generating non-multiplexed video at 30 images per second (IPS).The high-quality output video signals allow video to be viewed on any standard PC using Bosch's VIDOS video management software or a web browser.  Alternatively if used in conjunction with a high-performance MPEG-4 decoder a point-to-point hybrid analogue/digital solution can be created.  This technology uses the highest quality analogue cameras and analogue CCTV monitors, but with a pure IP solution in-between.The VideoJet 8008 has Dual Streaming technology, which encodes the video input signal in two different ways but simultaneously.  So, for example, in 2CIF resolution with 6 IPS for recording, and in 4CIF with 25 IPS for live viewing at a workstation with software decoder or a hardware monitor. The encoder features three key recording modes: continuous ring or linear recording; a continuous alarm-sensitive mode and a pre-/post-alarm option which preserves a short segment of video just before and after the alarm (up to 128 events per camera can be recorded).The internal hard disk records weeks at a time locally, or for more extended recording periods it can use the VIDOS-NVR network video recorder, which has RAID5 disk arrays attached for maximum fault tolerance and a storage capacity of over 45 TB.Commenting on the VideoJet 8008, Adam Breeze, Strategic Marketing Manager of Bosch Security Systems said, "Not only is it powerful enough to simultaneously allow MPEG-4 live viewing, recording and playback or backup, but combined with a complete set of security and distributed system management it is also the market's most powerful, highest quality MPEG-4 encoder and recorder."

RIVAs 1 channel Full HD video encoder with H.264 compression is equipped with an SDI in/output and a DVI monitor output. The encoder converts a SDI video (Full HD) signal into an IP network based video stream. The encoder RE1000HD achieves a frame rate up to 30 fps at 1080p resolution.

RIVA RE4100-OV-R40 is a 4 channel network video encoder blade card for installation into RIVA´s rack solution RE40K. It also features H.264 encoder with dual stream that offers a maximum resolution of 25/30 fps@D1 per video channel.

*MX/IP, HTTP, SNMPv2.

Bosch 100series has now been further improved with the bandwidth-efficient MPEG04 compression standard.  The new firmware version 6.00 has dramatically enhanced the top quality real-time video streaming over IP.  Additionally the new firmware version 6.10 for the VideoJet 100 and 400 adds a wider range of new DVR functionalities.   MPEG-4 capability upgrade features:   New innovative user interface, with user-definable logo, alarm trace and log window Transmission over TCP (Port 80) to establish connections that can overcome firewalls Multiple alarm IP addresses for automatic alarm connections Extra alarm mechanisms e.g. can assign different alarm IP addresses to the alarm inputs New remote control protocol:  RCP+ Additional control protocolsDVR functionalities: A wider range of recording options flexible enough to meet the needs of any application Video time line for easy to use playback of recorded sequences Video slices and snapshots can be directly saved without interrupting simultaneous recording Recording options can be configured from standard web browsers

*MX/IP, HTTP, SNMPv2.

Recording mode: Manual, schedule, motion, event-driven. Relay switch: 1 channel; Momentary/Latch; 24V AC, 1000mA. Dynamic IP internet connection. HDD type: SATA Interface; Internal x 1. Signal mode: PAL / NTSC. 6 concurrent independent users. Max. transmission frame rate: 25/30 fps @ D1, 50/60 fps @ CIF. Telemetry control: camera port (RS-422/485, Asynchronous, 8 data bits, 1 stop bit, no parity, 2.4-19.2kbps). Event: alarm, motion, video loss, disk full, hard disk failure. Action: TCP/IP Dial back, Recording, Buzzer, Telemetry preset, Relay control, E-mail. External alarm inputs: 4 x NC/NO.

RIVA RE4000L-R12 is a 4-channel network video encoder blade card for installation in RIVA´s rack solution RE12K.

When connected directly to a computer network, the EX-IO provides you with a ready-to-run network server, six non-potential contact inputs and six switch outputs via TCP/IP - there where you need them.  That saves installation costs and expands the action radius of your MULTIEYE system, due to TCP/IP communications, devices can be accessed or processes (such as image recording or messaging via SMS, Email, etc.) can be activated around the world via the inter-net.

*HTTP, SNMPv2. 

RIVA RE4000L-R40 is a 4 channel video encoder blade card for installation in RIVA´s rack solution RE40K.

*MX/IP, HTTP, SNMPv2.

*MX/IP, HTTP, SNMPv2.

Considering the vast investment of analog surveillance and CCTV cameras installed worldwide and the demand for saving costs, RIVA standalone network video encoders are the ideal solution to enable perfect migration to IP-Video. RIVA RE1000 is a one channel standalone network encoder with a compression rate of 25/30 fps in all resolution, up to D1. RIVA RE4000, the 4-channel H.264 standalone network encoder offers a compression rate of 100/120 fps at D1 resolution. Providing robust and high video quality, both RE1000 and RE4000 encoders already dispose of the primary intelligent "onboard" video content analytics (VCA) at no extra cost. Why VCA? The benefit of RIVAs embedded video analytics (VCA) is the analysis and evaluation of video images before being stored in a camera or being transmitted to management or storage systems. RIVA´s intelligent video analytics is able to track numerous targets and supports multisegment polygonal detection zones and segmented lines. It disposes of a self-learning algorithm: environmental changes, e.g. caused by different light conditions due to cloud formation or artificial light, repetitive movements occured by swaying trees or rippling water will be ignored, even in the primary VCA. Additional advanced VCA modules for special applications, e.g. people or vehicle counting, access control or object tracking are optionally available. Regarding availability and sales channel, please contact us at http://www.vidicore.com/, http://www.rivatech.de/.

RIVA RE4100-OV-R12 is a 4 channel network video encoder blade card for installation into RIVA´s rack solution RE12K. It also features H.264 encoder with dual stream that offers a maximum resolution of 25/30 fps@D1 per video channel.

With the MULTIEYE real-time video encoders MVE 1000/2000/4000, artec technologies, the German manufacturer of high-end CCTV equipment, again sets standards. The usage of encoders saves cost and secures past investments in analogue equipment by seamlessly combining analogue und IP-based video surveillance. Due to the integration with existing analogue cameras and/or other video sources over the IP Network, distant locations can be embedded in the video surveillance system easily. The MVE encoders are specially designed to be combined with artec's MULTIEYE HYBRID and MULTIEYE-NET software as well as with MULTIEYE-HYBRID DVRs.  But of course they can also be used as standalone devices for IP based remote video and audio transmission.All MVE encoders offer MPEG4 / MJPEG transmission with up to 25 IPS (PAL), 30 IPS (NTSC) per second in 4CIF format on each channel.  Depending on the model 1, 2 or 4 video inputs with loop trough are provided.  Offering USB interface i.e. to attach external storage, RS232 / 485, bi-directional audio as well as alarm in- and outputs the encoders are definitely "state-of-the-art".  The configuration of the MVE encoder is easy with either the MULTIEYE-Software or alternatively trough standard web browser.Special features:  Real-time network transmission of up to 4 simultaneous video streams in D1 resolution (720x576 pixel)MPEG-4 and MJPEG compression for high quality video streams (DVD quality) Deinterlacing function increases image quality at D1 resolutionBandwidth efficient dual-encoding Audio support for up to 4 simultaneous streams (G.711) Configurable image size, frame rate and bandwidth Optional external image storage trough USB interface Integrated web server Multicast and internet streamingVideo output in Quad (MVE 4000)Enhanced security by integrated configurable encryption trough AES (Advanced Encryption Standard) and password protectionIntegrated motion detection for activity triggered transmissionWith the MULTIEYE AUTOBACKUP module fully automatic export and archiving of video- and audio recordings can be realised Serial ports for PTZ camera control and/or integration of i.e. cash register-, access control- and ATM data (needs MULTIEYE DATALOG Module) Can also be used as standalone solution Perfectly aligned with MULTIEYE-HYBRID and MULTIEYE-NET Easy integration in third party systems trough HTTP API

The WMR-DVB Broadcast Encoders receive, demodulate, multiplex, decode and encode satellite TV/radio transmissions and transfer these loss-free as WMV9/VC-1 Windows Media streams into networks and Internet. Live display and function checks are done by standard web browser, MultiViewer or Set-top Box X230 with remote control.

All MVE Encoders offer MPEG4 / MJPEG transmission with up to 25 IPS (PAL), 30 IPS (NTSC) per second in 4CIF format on each channel.  Depending on the model 1, 2 or 4 video inputs with loop trough are provided.  Offering USB interface i.e. to attach external storage, RS232 / 485, bi-directional audio as well as alarm in- and outputs the encoders.

All MVE Encoders offer MPEG4 / MJPEG transmission with up to 25 IPS (PAL), 30 IPS (NTSC) per second in 4CIF format on each channel.  Depending on the model 1, 2 or 4 video inputs with loop trough are provided.  Offering USB interface i.e. to attach external storage, RS232 / 485, bi-directional audio as well as alarm in- and outputs the encoders.

Idesco GXV3501 is an IP video server/encoder H.264 video compression.

The NetServer-1 is a self-contained network video server for one video input. The unit comprises a high resolution vide encoder, wavelet video compression, video motion detection and a network server for up to 100 simultaneous video streams. The built in web pages allow the display of real time images and control of AutoDome cameras. The NetServer has serial outputs that can be used to control of AutoDome units and for connection of an external PSTN modem.

RIVA´s 1 channel quad display IP decoder RD1000 with H.264 supports a full frame rate at D1 resolution. The decompressed video data will be converted from a digital IP stream into an analogue signal.

*unicast, UDP multicast, TCP/IP, ICMP, IGMP, SNMP, RTCP, RTSP.  Onboard video analytics capabilities. Dual streaming capabilities.  H.264 Main Profile Compression.

ET16100CP-R16 is a receiver of 16-port coax to 16-port 10/100Base-TX Ethernet over Coax extender with PoC featuring constant data rate, dip switch for selecting distance 500m/300m and supports auto MDI/MDI-X function.

ET2200CPp-R8 is a receiver of 8-port coax to 2-port 10/100/1000Base-TX Ethernet over coax extender with rPoC. The receiver features 1000Mbps full-duplex communication, data rate up to: 40Mbps and auto MDI/MDI-X for reliable detection and correction for straight-though and crossover cables.

ET4200CPp-R16 is a receiver of 16-port coax to 4-port 10/100/1000Base-TX Ethernet switch with PoC featuring rack mount installation, Auto MDI/MDI-X for reliable detection and correction for straight-though and crossover cables.

ET4200CPp-RS16 is a receiver of 16-port Coax to 4-port 10/100/1000Base-TX Ethernet switch with PoC featuring auto MDI/MDI-X, full switching capability and connecting up to 16 x ET1100CPp-T and IP cameras.

ET4100CPp-TS is a transmitter of 4-port 10/100Mbps TX (PoE+) to 1-port coax ethernet switch with PoC featuring maximum transmission distance: 800m on RG-59/U coaxial cable, connecting up to 4 IP cameras or devices and automatically supports multicast transmission(IGMP).

ET8100CP-R8 is a receiver of 8-port coax to 8-port 10/100Base-TX Ethernet over Coax extender with PoC featuring constant data rate, dip switch for selecting distance 500m/300m and supports auto MDI/MDI-X function.

ET4200CPp-RS8 is a receiver of 8-port coax to 4-port 10/100/1000Base-TX ethernet switch with PoC featuring full switching capability, power over coaxial and connecting up to 8 x ET1100CPp-T and IP cameras.

1000 GB storage. Intel Pentium 4 processor up to 3.06 GHz. Onboard VGA controller with 8MB Memory.  

OT Systems ET1100UPp-R is a 10/100BASE-TX ethernet over UTP extender that features: PoE+(30W) and Power over Wire 802.af/802.3at Compliant Data Rate up to: 90Mbps(Downlink), 90Mbps (Uplink) Max. Distance: 600m over Cat5e cable. Support Wall Mount installation

OT Systems ET1100UPp-T is a 10/100BASE-TX ethernet over UTP extender that features: PoE+(30W) and Power over Wire 802.af/802.3at Compliant Data Rate up to: 90Mbps(Downlink), 90Mbps (Uplink) Support Wall Mount installation

OT Systems ET1111 is a 100BASE-FX ethernet media converter that features" Converts 10/100BASE-TX to 100BASE-FX Full/Half duplex, Auto-Negotiation Singlemode or Multimode fiber operation Single or Dual-core fiber with SC or ST connectors MDI/MDI-X Auto-Crossover supported Sleek Microtype design, fits within most camera housing

Convert 10/100BASE-TX to 100BASE-FX Auto-negotiation MDI/MDI-X Auto crossover supported Plug-and-play

OT Systems ET1111PpH is a 100BASE SFP ethernet media converter that features: Converts 100BASE-TX to 100BASE SFP Supports IEEE802.3at PoE+(30W) Supports Full/Half duplex Supports external 100BASE SFP Supports Auto MDI/MDI-X

Ethernet extension: security link over coax Maximum distance: 300m over Coax(RG-59/U) Microtype fits within most camera housings Built-in surge protection

Ethernet extension: security link over coax Simultaneous transmission of IP and CVBS over single coaxial cable Constant data rate: 36Mbps(downlink) / 11Mbps(uplink) Maximum distance: 300m over coax(RG-59/U) Support auto MDI/MDI-X

Data Rate up to: 90Mbps(Downlink), 90Mbps (Uplink) Max. distance: 600m over Cat5e cable Support auto MDI/MDI-X Support wall mount installation