CCTV Storage System / HDD  (974)

VTrak E5000 Series 16 Gb/s Fibre Channel to SAS subsystems deliver a high performance SAS solution with advanced enterprise level reliability and functionality 24 hot-swappable 3.5” (LFF) drive bays in a 4U chassis Supports SAS and SATA drives simultaneously and is compatible with leading SAS & SATA drives, HBAs, and RAID controllers Dual active/active controllers with ALUA for performance and access flexibility Quad 16Gb FC ports and dual 12Gb SAS ports per controller for connecting host and storage expansion

VTrak E5000 Series 16 Gb/s Fibre Channel to SAS subsystems deliver a high performance SAS solution with advanced enterprise level reliability and functionality 24 hot-swappable 2.5” (LFF) drive bays in a 2U chassis Supports SAS and SATA drives simultaneously and is compatible with leading SAS & SATA drives, HBAs, and RAID controllers Dual active/active controllers with ALUA for performance and access flexibility Quad 16Gb FC ports and dual 12Gb SAS ports per controller for connecting host and storage expansion

For mobile surveillance recording systems in transportation, storage devices need to be designed with application-tailored reliability, performance, security and product longevity in mind. Micron understands these requirements and offers one of the most rugged and robust industrial SSD product lines in the industry (M500IT). Temperature: -40°C to 85°C. Endurance: 3 million hours MTTF Vibration: 20G @ 7-2000Hz. Micron’s M500IT SSDs are available in 2.5” SATA format for traditional disk drive loading systems, as well as in a mSATA format for compact designs.  These SSDs offer 256-AES encryption and TCG Opal2.0 compliance for data security. These SSDs are available for long-life, 5 years from the time of introduction vs. typical 2 years for standard SSDs, making them a great choice for deployments and serviceability in mobile surveillance applications. Where to Buy? MTFDDAK128MBD-1AK12ITYY (2.5") / MTFDDAT128MBD-1AK12ITYY (mSATA)

For mobile surveillance recording systems in transportation, storage devices need to be designed with application-tailored reliability, performance, security and product longevity in mind. Micron understands these requirements and offers one of the most rugged and robust industrial SSD product lines in the industry (M500IT).  Temperature: Standard SSDs typically operate at 0°C to 70°C for applications with some degree of environmental controls.  In mobile surveillance recording systems, temperature requirements are expanded to deal with outdoor or adverse environmental conditions. M500IT SSDs are designed to operate at -40°C to 85°C.  In addition to ensuring read, write, and erase operations throughout the larger operating temperature range, the M500IT offers excellent cross-temperature performance, i.e. users can write at -40°C and read at 85°C (and vice versa), something not achievable by most SSDs. Endurance: With SSDs, endurance is measured by mean-time-to-failure (MTTF). In mobile surveillance applications, an SSD’s useful life is an important factor as they are deployed in vehicles that are in the field. Servicing them for SSD replacement may not be easy and may have significant cost associated with vehicle downtime.  Typical standard SSDs have an MTTF of 1.2 million hours, whereas M500IT SSD is designed for continuous operation and offers high endurance up to an industry best-in-class 3 million hours. Vibration: For mobile surveillance recording systems on trains, buses, and police vehicles, SSDs need to withstand high vibration requirements. Standard SSDs support vibration rates of 3.13G @ 5-800Hz, whereas M500IT SSDs support 20G @ 7-2000Hz, making them a perfect choice for vibration sensitive mobile vehicle applications.  Micron’s M500IT SSDs are available in 2.5” SATA format for traditional disk drive loading systems, as well as in a mSATA format for compact designs.  These SSDs offer 256-AES encryption and TCG Opal2.0 compliance for data security. These SSDs are available for long-life, 5 years from the time of introduction vs. typical 2 years for standard SSDs, making them a great choice for deployments and serviceability in mobile surveillance applications.

VTrak E5000 Series 16 Gb/s Fibre Channel to SAS subsystems deliver a high performance SAS solution with advanced enterprise level reliability and functionality 12 hot-swappable 3.5” (LFF) drive bays in a 2U chassis Supports SAS and SATA drives simultaneously and is compatible with leading SAS & SATA drives, HBAs, and RAID controllers Dual active/active controllers with ALUA for performance and access flexibility Quad 16Gb FC ports and dual 12Gb SAS ports per controller for connecting host and storage expansion

VTrak E5000 Series 16 Gb/s Fibre Channel to SAS subsystems deliver a high performance SAS solution with advanced enterprise level reliability and functionality 16 hot-swappable 3.5” (LFF) drive bays in a 3U chassis Supports SAS and SATA drives simultaneously and is compatible with leading SAS & SATA drives, HBAs, and RAID controllers Dual active/active controllers with ALUA for performance and access flexibility Quad 16Gb FC ports and dual 12Gb SAS ports per controller for connecting host and storage expansion

VTrak J5000 Series 12 Gb/s SAS subsystems deliver a high performance SAS solution with advanced enterprise level reliability and functionality 12 hot-swappable 3.5” (LFF) drive bays in a robust 2U chassis Supports SAS and SATA drives simultaneously and is compatible with leading SAS & SATA drives, HBAs, and RAID controllers Dual active/active SAS JBOD I/O modules provide redundant data paths to ensure data availability and redundant hot-swappable Field Replaceable Units (FRUs) Flexible wide-port configuration: Four x4 wide ports, two x8 wide ports or one x16 wide port per IOM and SES-2 compliant enclosure management

Micron's microSD card is designed for the IP video surveillance industry to help developers and system integrators bring enhanced system performance, recording redundancy, optimised network load reduction and lower TCO in edge storage applications. Endurance: 3 years@4Mbps 24/7 Continuously Recording (this is for 32GB) 3 years@8Mbps 24/7 Continuously Recording (this is for 64GB) Features: Health monitoring / Security protection The microSD card is a flash memory based removable storage device specifically designed to meet the performance, capacity and quality required for industrial devices or systems. In addition to mass storage-specific flash memory, the microSD card includes an on-board intelligent controller which manages interface protocols, security algorithms for content protection, data storage and retrieval, as well as Error Correction Code (ECC) algorithms, defect handling and wear leveling. Micron microSD card includes one or more Micron NAND Flash memory components and an microSD card controller. Where to Buy? Click here *  In trays, product also available with 'Jewel Case'LSDMI32G-000-747 (Tray) / LSDMI32GBJWW (Jewel case) ** Measurements are based on a 100MB file size in UHS-I mode and depend on the host configuration used to run the test.

VTrak J5000 Series 12 Gb/s SAS subsystems deliver a high performance SAS solution with advanced enterprise level reliability and functionality 16 hot-swappable 3.5” (LFF) drive bays in a robust 3U chassis Supports SAS and SATA drives simultaneously and is compatible with leading SAS & SATA drives, HBAs, and RAID controllers Dual active/active SAS JBOD I/O modules provide redundant data paths to ensure data availability and redundant hot-swappable Field Replaceable Units (FRUs) Flexible wide-port configuration: Four x4 wide ports, two x8 wide ports or one x16 wide port per IOM and SES-2 compliant enclosure management

VTrak J5000 Series 12 Gb/s SAS subsystems deliver a high-performance SAS solution with advanced enterprise level reliability and functionality 24 hot-swappable 2.5” (SFF) drive bays in a high-density 2U chassis Supports SAS and SATA drives simultaneously and is compatible with leading SAS & SATA drives, HBAs, and RAID controllers Dual active/active SAS JBOD I/O modules provide redundant data paths to ensure data availability and redundant hot-swappable Field Replaceable Units (FRUs) Flexible wide-port configuration: Four x4 wide ports, two x8 wide ports or one x16 wide port per IOM and SES-2 compliant enclosure management

In edge storage applications, system integrators can optimise the design for IP network load/capacity availability by leveraging local microSD card-based storage, recording redundancy and mobile access. Micron’s is optimised for these applications with: High endurance: Micron’s industrial card supports 3 years or more of high-quality continuous 24/7 video recording Outstanding recording performance: Micron’s industrial card contains firmware optimised to provide stable performance for 24x7 high quality video recording with minimal frame drops Industrial quality: Micron’s industrial card is a high-reliability microSD card for video surveillance usage with 2 million hours mean time to failure (MTTF) Smart tool for health monitoring: Micron’s industrial card offers a health monitoring feature for IP camera integration which reports card usage and lifetime remaining. Systems can integrate this feature into their software to alert end users

Expand Vess R2000 RAID subsystems up to 112 disk drives with Vess J2000 expansion units Industry leading performance and reliability at an excellent price Supports 6Gbps & 3Gbps SAS & SATA drives simultaneously Dual active/active SAS JBOD I/O modules 3U-16 form factor featuring hot-swappable drive bays Reliable N+1 redundant power supplies Energy efficient system reduces power and cooling costs

Expand Vess A2000/A4000 series NVR storage appliances and Vess R2000 subsystems with Vess J2000 expansion units. Industry leading performance and reliability at an excellent price Supports 6Gbps & 3Gbps SAS & SATA drives simultaneously 3U-16 and 4U-24 form factor featuring hot-swappable drive bays Reliable N+1 redundant power supplies Energy efficient system reduces power and cooling costs

VTrak J5000 Series 12 Gb/s SAS subsystems deliver a high performance SAS solution with advanced enterprise level reliability and functionality 24 hot-swappable 3.5” (LFF) drive bays in a robust 4U chassis Supports SAS and SATA drives simultaneously and is compatible with leading SAS & SATA drives, HBAs, and RAID controllers Dual active/active SAS JBOD I/O modules provide redundant data paths to ensure data availability and redundant hot-swappable Field Replaceable Units (FRUs)