Arecont Vision AV2355RS IP megapixel camera
Technical Specification
- Make: AV Costar
- Model code: AV2355RS
- Series: MegaDome G3 RS Series
- Chip Inch Size: 1/3 inch
- Colour Type: True Day / Night
MegaDome® G3 RS third generation megapixel cameras provide ample resolution to zoom-in for details in live or recorded video. With an IR corrected motorized lens and gimbal, MegaDome G3 RS is easy to install and manage with “no-touch” remote setup. Install the magnetic mounting plate, connect the PoE (Powerover-Ethernet) IP cable, magnetically snap in place and fasten the camera to the mounting plate, and then remotely configure the camera. Use the intuitive interface to remotely pan, tilt, zoom, and focus the sensor.
Read more| Make | AV Costar |
|---|---|
| Manufacturer | AV Costar (Arecont Vision) |
| Category | IP Cameras products |
| Model code | AV2355RS |
| Series | MegaDome G3 RS Series |
|
Chip Inch Size: 1/3 inch Colour Type: True Day / Night Resolution TVL: 1080p Megapixel: Megapixel Sensitivity lux: 0.02 ~ 0.2 Indoor/Outdoor: Indoor/Outdoor Digital (DSP): DSP Mount Type: Corner, Flush, Pole, Pendant, Wall mount Focal length: 2.8 ~ 6 mm Compression: H.264 Back Light Compensation: backLightCompensation White Balance: whiteBalance Electronic Shutter range: 1ms–500ms S/ N (Signal/ Noise) Ratio dB: 45 Signal Mode: PAL, NTSC |
|
| Electrical Specifications |
Voltage: 12 ~ 48 V DC / 24 V AC / PoE Power Consumption: 2.28 W |
| Network Properties |
Interface: 100Base-T Ethernet Network Protocols: RTSP, RTP/TCP, RTP/UDP, HTTP, DHCP, TFTP, HTTPS, 802.1x Image Frame Rate: 30 fps |
| Physical Specifications |
Dimensions mm: 147 x 128 Weight g: 1020 |
| Environmental Specifications |
Operating Temp oC: -40 ~ +50 C (-40 ~ +122 F) Operating Humidity %: 0 ~ 90 |
| Additional info |
MegaDome® G3 RS third generation megapixel cameras provide ample resolution to zoom-in for details in live or recorded video. With an IR corrected motorized lens and gimbal, MegaDome G3 RS is easy to install and manage with “no-touch” remote setup. Install the magnetic mounting plate, connect the PoE (Powerover-Ethernet) IP cable, magnetically snap in place and fasten the camera to the mounting plate, and then remotely configure the camera. Use the intuitive interface to remotely pan, tilt, zoom, and focus the sensor. |
| Download PDF version | |
