Pelco IMPS110-1I day/night indoor IP mini dome camera

Technical Specification

Features:
  • Make: Pelco
  • Model code: IMPS110-1I
  • Chip Inch Size: 1/4 inch
  • Colour Type: Colour / Monochrome
  • Resolution TVL: 800 x 600
Read more
Additional info:

Pelco IMPS110-1I is a day/night indoor IP mini dome camera with remote zoom lens for wide angle or long range surveillance needs. It supports up to two simultaneous video streams and a third service stream as well as features a simple motion detection algorithm that allows the camera to record or send an alarm when there is motion detected in a selected zone or within the entire scene. The camera integrates with major third-party video management systems through the Pelco API and other third-party software and systems through the open ONVIF Profile S standard.

Read more
Make Pelco
Manufacturer Pelco, Inc
Category IP Cameras products
Model code IMPS110-1I
Chip Inch Size: 1/4 inch
Colour Type: Colour / Monochrome
Resolution TVL: 800 x 600
Dome Type: PTZ
Sensitivity lux: 0.01
Pan Speed o/ sec: Manual : 355 o/ sec pan speed
Digital (DSP): DSP
Tilt Speed o/ sec: Manual : 75 o/ sec tilt speed
Indoor/Outdoor: Indoor
Mount Type: In-Ceiling mount
Focal length: 2.8 ~ 10 mm
Rotation Angleso: 360
Compression: H.264 high or main profiles; and MJPEG
White Balance: whiteBalance
Electronic Shutter range: 1/5 ~ 1/10,000 sec
Electrical Specifications Voltage: PoE, 18 ~ 32 V AC
Power Consumption: < 6 W
Network Properties Interface: RJ-45 connector for 100Base-TX
Network Protocols: TCP/IP, UDP, ICMP, IPv4, SNMP v2c/v3, HTTP, HTTPS, SSL, SSH, SMTP, FTP, RTSP, UPnP, DNS, NTP, RTP, RTCP, LDAP
Image Frame Rate: 30 ips
Inclusive DVR/ Web Server: MicroSDHC or SDXC card
Physical Specifications Weight g: 610
Environmental Specifications Operating Temp oC: -10 ~ +50 C (14 ~ 122 F)
Operating Humidity %: 15 ~ 85
System Requirements Web Browser: Microsoft Internet Explorer 8.0 and later
Additional info Pelco IMPS110-1I is a day/night indoor IP mini dome camera with remote zoom lens for wide angle or long range surveillance needs. It supports up to two simultaneous video streams and a third service stream as well as features a simple motion detection algorithm that allows the camera to record or send an alarm when there is motion detected in a selected zone or within the entire scene. The camera integrates with major third-party video management systems through the Pelco API and other third-party software and systems through the open ONVIF Profile S standard.
Download PDF version