CCTV Housings  (775)

Dome Housings, 134 x 318 x 211.5 mm, 2,000, Aluminum, 230 V AC

Weather-proof housing with sun-shield and wall bracket made out of stainless steel AISI316L for use under aggressive environmental conditions e.g. offshore/coastal, industrial areas, within tunnels.  Equipped with a self-regulating heater, integrated power connection board and additional safety thermostat suitable for 230 VAC cameras, cable access via 2 x PG-9 cable glands. 

Clear lexan bubble with inner liner.  For board cameras upto 42x42 mm.

Internal camera mounting-height adjustment.  3x cable glands.  Temperature regulation via PTC heating element and additional safety thermostat.  Isolated camera mounting to avoid ground-loops.  IP66 protection rating.

wall mount bracket for surveyor housing. 4" PCD.

Available as a desk top unit designed to provide individual on/off control for up to four Observer housings. It provides adequate power for a total of four housing motors and incorporates an optional switcher follower function allowing motors to be brought into use as each camera is selected, either manually or automatically.

Infrared illuminator housing. Radient distance 100m. Mounting - bottom.

Clear lexan bubble with inner liner. For board cameras upto 42x42 mm.

This 24V Scan Controller is available as a desk top or plinth mounted unit designed to provide individual on/off control for up to four Surveyor housings. The MC64 will provide adequate power for a total of four surveyor housing motors

Tinted Lexan window screen.  For board cameras upto 42x42 mm.

Small weather protection housing made of V4A steel with temperature-controlled front glass heating, internal fan and sun-protection for the high-speed pan/tilt head ARGUS. Front glass with self-cleaning and hydrophilic coating.

This is available to aid installation into a suspended ceiling.

Invisible infrared illuminator housing. 

Weather-proof housing for suspended mount with self-regulating heater, integrated power connection board and additional safety thermostat.  Suitable for 230 VAC cameras or for low voltage powered cameras in combination with an additional inbuild mains unit.  Aluminium case including ceiling bracket, cable access via 3 x PG-9 cable glands (3rd gland applicable for remote control of cameras via RS-422 bus).

Bosch MIC440SUNSHIELD is a sunshield for the MIC440 camera. It is a two-part molding designed to provide additional protection against direct solar radiation by reflecting solar exposure, and creating an insulating gap between the environment and the surface of the camera.

Large weather protection housing made of V4A steel with temperature-controlled front glass heating, internal fan and sun-protection for the high-speed pan/tilt head ARGUS.  Front glass with self-cleaning and hydrophilic coating.  Particularly large inner dimensions for mounting of motor-zoom lenses up to f = 240 mm.

Outer housings, made of aluminum with sunshield, heater and fan.Internal dimensions - 110 x 75 x 205 mm; the size of the viewing window 74x64mm, glass thickness 5mm. Convenient mechanism for opening / closing with secure lock. Beige colour.

Low-impact acrylic clear bubble for AUTODOME HD in-ceiling cameras Offers enhanced image clarity for high-resolution images Also offers maximum sensitivity by allowing as much light through as possible

Small weather protection housing made of V4A steel with temperature-controlled front glass heating, internal fan and sun-protection for the high-speed pan/tilt head ARGUS.  Front glass with self-cleaning and hydrophilic coating.  Inner dimensions for mounting of motor-zoom lenses up to f = 120 mm.

PIH-5064 is a cable managed housing featuring built-in auto activate heater & blower.

Small weather protection housing made of V4A steel with temperature-controlled front glass heating, internal fan and sun-protection for the high-speed pan/tilt head ARGUS. Front glass with self-cleaning and hydrophilic coating.

Low-impact acrylic tinted bubble for a pendant housing Offers enhanced image clarity for high-resolution images Offers covertness by making it difficult to see from the outside the direction the camera is facing

Easy installation IK10 rated for better protection Designed especially for use with the FLEXIDOME IP 3000i IR outdoor cameras

Camera Housings, External, Wall mount, IP66, with Heater, Sunshield, 353 x 124.6 x 133 mm, 2,200, 12 ~ 30 V AC/DC

Camera Housings, Internal, Wall, Ceiling mount, IP68, Stainless Steel, 168.3 (Dia) x 373 mm, 12 kg

Camera Housings, Internal, Ceiling mount, Dustproof, Aluminium, 300 mm, 2,400

Bosch VGA-BUBBLE-CCLR is a impact resistant polycarbonate clear rugged bubble for an in-ceiling housing.

Clear rugged IK10-rated nylon bubble qualified for use with AUTODOME 7000 HD cameras with pendant housings Provides both impact resistance and HD quality image resolution Offers maximum sensitivity by allowing as much light through as possible Protects camera from vandalism Designed to meet stringent strength standards without compromising optical clarity, the rugged bubble can withstand impacts equivalent to a 4.5 kg (10 lb) weight dropped from a height of 3 meters (10 ft)

An impact resistant polycarbonate tinted rugged bubble for an in-ceiling housing The optical clarity is comparable to glass or acrylic, although the surface is much softer Offers covertness by making it difficult to see from the outside the direction the camera is facing Protects camera from vandalism Designed to meet stringent strength standards without compromising optical clarity, the rugged bubble can withstand impacts equivalent to a 4.5 kg (10 lb) weight dropped from a height of 3 meters (10 ft)

Anviz C1401 is an IP66 camera housing with water-proof coating film.

Low-impact acrylic clear bubble for an in-ceiling housing Offers enhanced image clarity for high-resolution images Also offers maximum sensitivity by allowing as much light through as possible

Weather-proof housing with integrated wall-mount bracket, concealed cable access, sun-shield, self-regulating heater, integrated power connection board and additional safety thermostat.  Suitable for 230 VAC cameras or for low voltage powered cameras in combination with the optional mains unit NT/DC-1500. 

Bosch MICTHERSUNSHLD is a sunshield kit for MIC Thermal cameras. It is a two-part molding, designed to provide additional protection against direct solar radiation, particularly in sunny climates.

Low-impact acrylic clear bubble for a pendant housing Offers enhanced image clarity for high-resolution images Also offers maximum sensitivity by allowing as much light through as possible

Low-impact acrylic tinted bubble for an in-ceiling housing Offers enhanced image clarity for high-resolution images Offers covertness by making it difficult to see from the outside the direction the camera is facing

Low-impact acrylic large clear bubble for an in-ceiling housing Offers enhanced image clarity for high-resolution images Also offers maximum sensitivity by allowing as much light through as possible

Low-impact acrylic tinted bubble for AUTODOME HD in-ceiling cameras Offers enhanced image clarity for high-resolution images Offers covertness by making it difficult to see from the outside the direction the camera is facing

#005 key. Fits most Altronix enclosures Product Weight: 0.648159 Lbs. (0.294 kg). Shipping Weight: 0.998694 Lbs. (0.453 kg).

Low-impact acrylic large tinted bubble for an in-ceiling housing Offers enhanced image clarity for high-resolution images Offers covertness by making it difficult to see from the outside the direction the camera is facing

Camera Housings, Internal, Wall, Ceiling mount, Dustproof, Sunshield, Aluminium, 495 x 90 x 90 mm, 1.2 kg, 12 V DC, 24 V AC