CCTV Housings  (777)

Optional accessories: SNCA-CLEAR/2 (included) - SNCA-TINTED/2

Optional heater and blower.

Optional accessories: SNCA-CLEAR/2 (included) - SNCA-TINTED/2.

Optional accessories: SNCA-CLEAR/2 (included) - SNCA-TINTED/2, SNCA-HEATER.

Optional accessories: SNCA-CLEAR/2 (included) - SNCA-TINTED/2, SNCA-HEATER.

Optional accessories: SNCA-CLEAR/2 (included) - SNCA-TINTED/2, SNCA-HEATER

Optional accessories: SNCA-CLEAR/2 (included) - SNCA-TINTED/2, SNCA-HEATER

Optional accessories: SNCA-CLEAR/2 (included) - SNCA-TINTED/2

Optional accessories: SNCA-CLEAR/2 (included) - SNCA-TINTED/2

SNCA-HRZ50-INT Outdoor Dome Camera Housing

Optional accessories: SNCA-CLEAR/2 (included) - SNCA-TINTED/2, SNCA-HEATER.

Optional accessories: SNCA-CLEAR/2 (included) - SNCA-TINTED/2, SNCA-HEATER

Optional accessories: SNCA-CLEAR/2 (included) - SNCA-TINTED/2, SNCA-HEATER

Supports IP66 and NEMA 4X rating against the ingress of dust and water, and IK10 rating for protection against impact and vandal acts The installer-friendly, lightweight plastic casing protects from corrosion All cables are protected inside the wall mount to enhance vandal protection and remove the risk of solar degradation Arctic Temperature Control ensures that the camera can start up even at -40 °C (-40 °F) following a power failure Features a terminal connector for AC/DC power A slot is dedicated for an optional intrusion alarm switch Comes with a wall mount and an integrated sun cap

Sony UNI-ORL7T2 is an outdoor vandal resistant pendant mount tinted dome housing. This housing is specifically designed to accommodate Sony’s indoor PTZ cameras of SNC-RH/RS Series, SNC-ER/EP Series and SNC-W Series. The housing offers easy camera installation.

Supports IP66 and NEMA 4X rating against the ingress of dust and water, and IK10 rating for protection against impact and vandal acts The installer-friendly, lightweight plastic casing protects from corrosion All cables are protected inside the wall mount to enhance vandal protection and remove the risk of solar degradation Arctic Temperature Control ensures that the camera can start up even at -40 °C (-40 °F) following a power failure Supports Power over Ethernet A dedicated slot for an optional intrusion alarm switch, and comes with a wall mount and an integrated sun cap

IDIS DA-BH1100 is a box housing for DC-B and DC-Z network camera series.

The SpeedDome® Ultra outdoor housing allows SpeedDome Ultra programmable dome cameras to be installed in virtually any environment.  The housing has been designed to provide maximum protection to the internal camera in various weather conditions.  In extreme temperatures, the housing's built-in thermostatically controlled heater and blower prevent excessive ice from forming on the outside bubble.

The SNCA-HRX550/EXT12V is an IP66 rated housing for dome cameras. Designed as a DC 12V input model for outdoor installations, the SNCA-HRX550/EXT12V features an optically clear .118” (3mm) thick aspheric polycarbonate dome, a 24-hour fan for effective heating and condensation protection and a thermostatically controlled DC 12V heater. A cast aluminium pendant mount comes as standard.

Pelco EH16 series is an indoor/outdoor camera enclosure with a compact body suitable for easy installation. It is designed to operate in a wide range of environments and to protect electronic components. Pelco EH16-2MTS is ideal for small to medium size analogue and IP cameras.

Sony UNI-ONS7C1 is an outdoor pendant mount housing that includes thermostatically controlled heater and blower.

Sony UNI-OPS7C1 is a outdoor pressurised pendant mount housing that featurestThermostatically controlled heater and blower and AC 24V input, integrated DC12V power supply for camera power.

A robust metal casing with IP66/IP67, NEMA 4X, and IK10 ratings for protection against dust, UV radiation, water and impact Spaciously designed to house cameras with large CS-mount lenses and connecting accessories Maintains optimal conditions for sensitive components, and enables cameras to operate in both extremely hot and cold environments, with efficient cooling fins and heaters Suitable for fixed box cameras in both indoor and outdoor installations Offers built-in IR illumination for outstanding surveillance in the dark, and PoE connectivity for easy one-cable installation

The SpeedDome Ultra pressurized outdoor housing allows the SpeedDome Ultra dome to be installed in virtually any hostile environment.  The housing is pressurized, temperature controlled and weatherproof, protecting the dome from a wide range of outside elements such as moisture, dust and temperature fluctuations.  In extreme temperatures, the housing's built-in thermostat and heater prevents ice from forming on the outside bubble.  The bubble assembly is affixed to the top via nine screws.

The UNI-ORBC6 is an outdoor IP66-rated housing with a feed-through wall/pole mount. It features a dynamic power allocation Power-over-Ethernet (PoE) input, including 30 watt midspan, and a heater and blower. The UNI-ORBC6 supports .afPoE cameras and Sony sunshield.

Pelco EH16 series is an indoor/outdoor camera enclosure with a compact body suitable for easy installation. It is designed to operate in a wide range of environments and to protect electronic components. Pelco EH16-2MTS is ideal for small to medium size analogue and IP cameras.

Sony UNI-ORL7C2 is an outdoor vandal resistant pendant mount clear dome housing. This dome housing is specifically designed to accommodate Sony’s indoor PTZ cameras of SNC-RH/RS Series, SNC-ER/EP Series and SNC-W Series. The housing offers easy camera installation.

Models Available with Factory-Installed, Low-Power Heater and Blower with 24 VAC Camera Power Supply Power Over Ethernet (PoE) Models: -2P and -8P Models Provide PoE to the Camera and Power to the Heater and Blower Advanced Optics for Megapixel Camera Support Cable Entry Glands and Mounting Holes on Bottom of Enclosure Designed for Indoor/Outdoor Applications Easy Access for Servicing and Installation Optional Sun Shroud

Models Available with Factory-Installed, Low-Power Heater and Blower with 24 VAC Camera Power Supply Power Over Ethernet (PoE) Models: -2P and -8P Models Provide PoE to the Camera and Power to the Heater and Blower Advanced Optics for Megapixel Camera Support Cable Entry Glands and Mounting Holes on Bottom of Enclosure Designed for Indoor/Outdoor Applications Easy Access for Servicing and Installation Optional Sun Shroud

Sony UNI-ONL7C2 is an outdoor pendant mount clear dome housing with heater and blower for indoor PTZ cameras of SNC-RH/RS series, SNC-ER/EP series and SNC-W series. The housing offers easy installation and camera protection in a compact size.

The UNI-ONL7C7 is an outdoor 7” ultra-high PoE clear dome housing with a pendant mount. Its Power-over-Ethernet (PoE) has outdoor 60 watt midspan included, and it features a heater and blower.It is compatible with the SNC-ER, SNC-EP, SNC-ZR and SNC-ZP series and the SNC-RH124, SNC-RS44 and SNC-RS46 cameras.

Sony UNI-OFL7C2 is an outdoor flush mount clear dome housing with heater and blower for indoor SNC-RH/RS series, SNC-ER/EP series and SNC-W series of PTZ cameras. The housing offers vandal resistance, easy installation, and camera protection in a compact size.

Sony UNI-ONL7T2 is an outdoor pendant mount tinted dome housing with heater and blower for indoor PTZ cameras of SNC-RH/RS series, SNC-ER/EP series and SNC-W series. The housing offers easy installation and camera protection in a compact size.

Pelco EH16 series is an indoor/outdoor camera enclosure with a compact body suitable for easy installation. It is designed to operate in a wide range of environments and to protect electronic components. Pelco EH16-2MTS is ideal for small to medium size analogue and IP cameras.

Sony SNCA-HRX550-PRE is dome camera housing.

Sony SNC-UNIHB/1 is an indoor/outdoor housing with heater and blower as well as with clear window and hinged opening for Sony’s SNC-CH120/CH140/CH220/CH240 cameras. It includes tamper resistant screws to lock down the housing top. Also a high-structure steel wall/pole mount bracket is included. It is designed for mounting to a flat wall or round pole, larger than 3.5-inches in diameter.

Sony UNI-OPL7T2 is a outdoor pressurised dome housing that offers versatility and camera protection in a compact size. Its pressurisation eliminates the effects of moisture, dirt, and pollution on valuable camera equipment. A heater and blower are standard. 24VAC input.

Panasonic CSI202C is an external housing for WV-SC384,WV-SC385 cameras with heater and smoked cover and wall bracket.

Panasonic CKS600 is an external housing for box cameras with heater.

Sony UNI-OFS7C1 is an outdoor flush mount clear dome housing with heater and blower for SNC-RZ30 and SNC-RZ50 PTZ cameras. The housing offers vandal resistance, easy installation, and camera protection in a compact size.