CCTV Housings  (777)

Videotec NTL1K1500 thermal camera housing provides the vision also in complete darkness, fog, rain, smoke or for long-range distances. The NTL housing can be installed on NXPTH Pan & Tilt head, to obtain a complete positioning system.

Videotec HTV32K2A000 housing has been designed to fit thermal cameras with compact lenses for vision even in total darkness, fog, rain, smoke, or for long distances. It is possible to use it for a wide range of day/night surveillance systems, such as: monitoring and rescue in the event of a fire, public safety, along with airport, industrial and environmental surveillance. The frontal opening system allows an easy access to the camera and all internal connections.

Videotec HTV32K1A000 housing has been designed to fit thermal cameras with compact lenses for vision even in total darkness, fog, rain, smoke, or for long distances. It is possible to use it for a wide range of day/night surveillance systems, such as: monitoring and rescue in the event of a fire, public safety, along with airport, industrial and environmental surveillance. The frontal opening system allows an easy access to the camera and all internal connections.

Compatible with IEEE 802.3af, IEEE 802.3at/PoE Plus  PoE/Hi-PoE power supply for heating, demisting, illuminator, fan and PoE network camera  Special cable gland for a fast Ethernet connection/disconnection without cutting the RJ45 connector  Version with fan with double air filter  Version with anti-icing heated glass

The NXM36 Hi-PoE housing has been developed for installations in highly corrosive areas such as industrial chemical, petrochemical, marine, naval and offshore platforms and is made entirely from electropolished and passivated AISI 316L stainless steel for maximum protection against deterioration. Weatherproof IP66/IP69/IP68, it provides complete protection against dust and is submersible to 40m (130ft). Key features: Made of AISI 316L electropolished stainless steel PoE/Hi-PoE to power heater & network camera Category 5e shielded power cable Compatible with IEEE 802.3af, IEEE 802.3at/PoE Plus IP66/IP69/IP68, submersible down to -40m (-130ft), equal to 5bar max pressure Cylindrical body enclosed by two 6mm(0.24in)-thick circular flanges 2 PG13.5 cable glands in nickel-plated brass for external connections  

Videotec HOT39D1A000 housing has been designed to accommodate a variety of cameras and lense. Very easy to install thanks to the side opening system that allows the full access to the camera, lenses and all internal connections. The front is designed to offer protection from UV rays and atmospheric agents. The housing proposes various mounting options, wall or ceiling brackets, feedthrough and non-feedthrough, or Pan & Tilt head.

Videotec HOT39D2A085 housing has been designed to accommodate a variety of cameras and lense. Very easy to install thanks to the side opening system that allows the full access to the camera, lenses and all internal connections. The front is designed to offer protection from UV rays and atmospheric agents. The housing proposes various mounting options, wall or ceiling brackets, feedthrough and non-feedthrough, or Pan & Tilt head.

Videotec NXM36K2000 CCTV camera housing is developed for installations in highly corrosive areas such as industrial chemical, petrochemical, marine, naval and offshore platforms. The camera housing can be installed on NXPTH Pan & Tilt head, to obtain a complete positioning system.

Videotec NXM1K1050 CCTV camera housing is designed to operate in special environments such as marine, industrial, chemical and where the external conditions are highly corrosive. The NXM housing can be installed on NXPTH Pan & Tilt head, to obtain a complete positioning system.

Videotec NXM36K1050 CCTV camera housing is developed for installations in highly corrosive areas such as industrial chemical, petrochemical, marine, naval and offshore platforms. The camera housing can be installed on NXPTH Pan & Tilt head, to obtain a complete positioning system.

Videotec HEG47K2A000 is a robust and large housing suitable for a variety of applications, for the monitoring of urban and highways, in particular if coupled with the PTH900 P&T series. The opening system allows an easy access for installation and servicing.

Videotec HPV42K2A017 is a sturdy tamper-proof housing designed to simplify the installation and service and guarantee total protection against all environmental conditions. It is entirely constructed from technopolymer and offers high impact resistance, high weather protection from external agents and UV rays.

Cylindrical body enclosed by two 9mm(0.4in)-thick circular flanges  Available accessories: heater and double heater (for temperatures down to -40°C (-40°F), camera power supply, wiper and washer pump  2 PG13.5 cable glands in nickel-plated brass for external connections

Flush Mount Housing

Explosion proof certified.  Available accessories include: sunshield, autopan, reinforced housing heater and motors heater.  Horizontal range 360° for fixed speed: 6°/s.  Vertical range -90° ~ +90° for fixed speed: 2.4°/s.  External components are constructed according to the 94/9/CE ATEX standard and IEC 60079-0:2000, IEC 60079-0:2001, IEC 61241-1:2004 protocols.

Videotec HOT39D2A000 housing has been designed to accommodate a variety of cameras and lense. Very easy to install thanks to the side opening system that allows the full access to the camera, lenses and all internal connections. The front is designed to offer protection from UV rays and atmospheric agents. The housing proposes various mounting options, wall or ceiling brackets, feedthrough and non-feedthrough, or Pan & Tilt head.

Indoor Housing

Camera Housings, Internal/External, Wall mount, IP66, with Heater, Sunshield, Aluminum, 12 VDC

Clear dome, pre-mounted in a white cover Included with AXIS Companion Dome mini LE outdoor IP dome camera

Clear dome with a durable hydrophilic coating Helps to prevent water droplets from covering the dome in rainy conditions The coating also provides a self-cleaning effect that helps carry away dirt and dust by rainwash Hard-coated for increased protection against scratches

Standard smoked or clear dome with anti-scratch hard coating Compatible with selected AXIS P32 indoor cameras

Smoked or clear dome with anti-scratch hard coating Compatible with selected AXIS M32 and P32 outdoor cameras

Standard clear dome with anti-scratch hard coating Compatible with selected AXIS Q61-LE cameras Weather-resistant and chemical-resistant Rubber gasket included

Clear dome with a durable hydrophilic coating Helps to prevent water droplets from covering the dome in rainy conditions The coating also provides a self-cleaning effect that helps carry away dirt and dust by rainwash Hard-coated for increased protection against scratches

Sony UNI-LD280 is a replacement capsule for network HD cameras.

Dome Housings, Ceiling mount

Outdoor Housing w/sun shield, fan & heater

Sony UNI-LD280S is a smoked dome cover for SNC-DH140T/240T/180/280/120T/220T/160/260, SNC-EM602R/632R, SNC-VM602R/632R outdoor mini dome cameras.

Sony SNCA-ICPTZ/C is a clear low-profile indoor ceiling housing for PTZ cameras. The upper body is made of steel with a white powder coat trim ring. It features an optically clear .118” (3mm) thick 7” aspheric polycarbonate dome for easy installation and servicing below the ceiling.

Sony YTL-D124S is a smoked dome cover for flush mount kit.

Sony UNI-ILD3C3 is an indoor recessed plenum housing for SNC-DS10, SNC-DM110, SNC-DF50N, SNC-DH120/DH120T, SNC-DH140/DH140T, SNC-DH220/DH220T, and SNC-DH240/DH240T IP dome cameras. The housing is UL 60065 Listed.

The SNCA-ICPTZ/C is a tintedlow-profile ceiling housing for the SNC-RZ30P, SNC-RZ25P, SNC-RZ50P, SNC-RX530P, SNC-RX550P, SNC-RX570P, SNC-RS44P, SNC-RS46P, SNC-EP521, SNC-EP550, SNC-EP580, SNC-ER521, SNC-ER550, SNC-ER580 and SNC-RH124 PTZ cameras.The upper body is made of steel with a white powder coat trim ring. It features a tinted .118” (3mm) thick 7” aspheric polycarbonate dome for easy installation and servicing below the ceiling

Sony UNI-LD140S is a smoked dome cover for SNC-DH120/220/140/240 indoor mini dome cameras.

The SNCA-WP602 is a Weather Protector for use with the following Sony outdoor minidome cameras: SNC-VM632R, SNC-VM602R, SNC-EM632RC, SNC-EM602RC. Helping to shade the camera from direct sunlight, the Weather Protector is particularly useful for outdoor installation in high-temperature environments. It also provides protection against rain and snow.

Sony SNCA-HRX550/INT is an internal dome housing.

Corner mount adapter. Used to mount fixed housing to an outside corner. Aluminium construction.

The AD1301 wedge ceiling housing is designed to accommodate most solid-state camera and lens combinations.  The fully enclosed, low profile design allows for inconspicuous camera placement and excellent protection, yet easy to install and service.

Sony SNC-UNI is an indoor/outdoor housing with clear window and hinged opening for Sony’s SNC-CH120/CH140/CH220/CH240, & CS50W cameras. It includes tamper resistant screws to lock down the housing top. Also a high-structure steel wall/pole mount bracket is included. It is designed for mounting to a flat wall or round pole, larger than 3.5-inches in diameter.

Camera Housings, Internal, 0 ~ 50, Vandal Resistant, 178 x 354.5 x 155 mm, 3500, 12 V DC

The AD1303 wedge ceiling housing is designed to accommodate most solid-state camera and lens combinations.  The fully enclosed, low profile design allows for inconspicuous camera placement and excellent protection, yet easy to install and service.