Analog Transmission Systems  (757)

The LTC 4651 Transceivers are designed especially for the transmission of Bi-Phase control code signals used in the Allegiant Series of switcher/controllers, various DVRs, multiplexers, and other camera control systems.  They are also compatible with Manchester code and standard RS-232 signals.  These units operate in the 850 nm range and contain a removable screw terminal type connector that allows easy connection to the shielded twisted pair cable carrying the control signal.  These units can also be used as an RS-232C transceiver that is compatible with EIA Standard RS-232C levels.  The system is suitable for simplex asynchronous data transmissions using one fiber, or full duplex asynchronous data transmissions using two fibers up to 64 kbaud.

Vigitron, Inc. has introduced UTP active receiver hubs with automatic video compensation (AVC). The units can transmit and receive video images over UTP cable through mid range (1,200 metres) to long range (2,000 metres) at a price that is affordable for installers and end-users. Integrators can fit a Vi6300VT active transmitter at the camera in the knowledge that a Vi6200 series hub in the site control room will automatically compensate for video loss up to 1,200 metres. Similarly, the Vi6300 series provides excellent image quality up to 2,000 metres. The receivers do not require any adjustment to give optimum pictures. The new Vigitron models fit in a standard 19-inch (48 cm) rack and are supplied with rack mounting kits and a full set of interconnecting cables. UK and European based integrators and distributors will appreciate that the equipment is uniquely designed for the PAL video standard and is fully compatible with other worldwide video standards NTSC and SECAM. The units' immunity to noisy crosstalk and interference (70 dB) is among the best in the industry and there is built-in ground loop isolation to remove damaging hum bars and distorting ground loops. Engineers will also benefit from compatibility with qualified UTP built-in cameras, any passive transmitters and the smallest video transmitter in the world, the Vi1003M. There are video-present diagnostic LED indicators for each channel and the connectivity options (screw terminal or RJ-45 connector) complement Vigitron's extensive line of video-power-data transmission equipment.

UTP / CAT 5 transmission, TX/RX, PAL, NTSC, 60, 7, 47 x 15 x 16, -10 ~ +50, 0 ~ 95

The Vigitron Vi6116 is an advanced 16 port active receiver hub that receives high resolution colour or black and white video over unshielded twisted pair Category 2-7, at distances up to 6,000 ft. (1,830 m) when used with a Vigitron Vi6100VT Active Transmitter. It can receive video signals from any Vigitron passive transceiver for distances up to 3,000 ft. (915 m).

The Vi1416VPD is a device that combines video, PTZ data and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment.  It supports up to 16 cameras and is designed to be placed at a location between the cameras and control room to extend the video up to 3,000 feet.  The Vi1416VPD has a 16-ch fully isolated class II built-in 28/24 VAC power supply.  Each camera power output is equipped with a glass fuse for extra protection.  All fuses are accessable from front.

Alvarion BreezeACCESS Wi2 supports WiMAX/pre-WiMAX operation in 2.X, 3.X and 5.X GHz. Integrates new technologies such as 802.16e. Rich features including end-to-end QoS, virtual AP, VLAN and VLAN mapping, and 802.11i and 802.1x security. Comprehensive full solution combining BreezeACCESS VL or BreezeMAX for backhauling with a robust high power and feature rich Wi-Fi 802.11 b/g access poin. Standard Interface: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.11 b, g. Maximum Clients: 128 for the radio interface set to access point mode. Network Management: Web-management, Telnet, SNMP.

Genie’s “Smart Cabling” Active Baluns are designed for use with Category 5e Unshielded Twisted Pair (UTP) cable. Each Transmitter and Receiver is supplied with a DC12V Power supply as standard and can transmit and receive full motion composite video signals up to 900 metres in Colour and 1800 metres inMonochrome.

The ComNet™ FVR22 dual video receiver detects two independent AM video signals in one module on two independent multimode fiber optic cables. The module is not a multiplexer. The module is ideal for smaller CCTV installations and the rack mount version can be used to double the fixed video capacity of the C1 rack for up to 28 independent video channels per card cage.

The IFS 4-Port Ethernet to Coax/TP Industrial Media Converter is a high-performance module that combines two well-proven technologies - ethernet and VDSL2- providing a cost-effective solution for utilising an existing telephone cable or coax cable infrastructure when migrating from analog to an Ethernet/IP system.

The ComNet™ FVT/FVR(X)MI[/M] features an HDMI™ fiber link for uncompressed high-resolution bi-directional communication with full HDCP copyright protection, EDID and CEC connection functionality. The high-resolution signal is transmitted over one multimode fiber using multiple wavelengths up to 1000m.

ComNet CNFE2CL2MC is an environmentally hardened modem that supports two Ethernet channels over two twisted copper pairs or two coaxial cables at data rates of up to 91 Mbps. The fastest usable data rate is automatically selected, depending upon the copper circuit transmission distance and cable quality.

The ComNet™ FVT11M video mini-transmitter supports transmission of a fixed video signal using AM modulation on one multimode fiber optic cable. The FVT11M video transmitter is compatible with the FVR11M, FVR10M, FVR21, and FVR22 receivers. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments.

The Vigitron Vi6100VR is an active device that receives high-resolution colour or B&W video over unshielded twisted pair wires. Category 2-7 at distances up to 6,000 feet (1830 m) when used with Vigitron Vi6100VT Active Transmitter.  It can be used with any Vigitron passive transceiver for distances up to 3,500 feet (1060 m).

The Vigitron Vi6116 is an 8-port active receiver hub that receives high-resolution colour or B&W video over unshielded twisted pair wires.  Category 2-7 at distances up to 6,000 feet (1830 m) when used with Vigitron Vi6100VT Active Transmitter.  It can be used with any Vigitron passive transceiver for distances up to 3,500 feet (1060 m).

The Vi1304VPD is a passive "pass-through" device that combines video, PTZ data, and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment.  It supports up to 16 cameras and is designed to be installed in the wiring closet or control room.  The VI1304VPD receives low-voltage camera power from any third-party multi-output Class 2 power supply.  Each camera power output is equipped with a self-resetting fuse for extra protection.

UTP / CAT 5 transmission, RX, 2, Colour / Monochrome, PAL, NTSC, 70, 40, 41 x 74 x 25, 12 ~ 24 V DC / V AC, -10 ~ +50, 0 ~ 95

The Vigitron VI1000 and VI1010 are passive video transmission devices that transmit video over unshielded twisted pair wires, point-to-point, for distances up to 1100 feet (330 m).  Their design allows mounting directly to the video source or receiver without any additional cabling.

The Vi1053VPD is a passive device that transports a single channel of video, RS-422/RS-485 data and camera power over Cat-5 cable for distances up to 1,000 feet* (305 m).  It may be used with the Vi12XXVPD series for shorter distances and with Vi13XXVPD for longer distances.

The Vigitron VI6008HR, VI6016HR, VI6032HR are 8, 16, and 32-port active video receiver HUBs.  They receive colour and B&W video over 6000 feet (2000 m) of point-to-point unshielded twisted pair (UTP) wires.  These HUBs are used with VI6000VT (for up to 6000 ft) or any Vigitron passive transceivers such as VI1000 (for up to 3000 ft) transceivers.  The distance for each channel is adjustable using a single potentiameter.  A green LED indicates video presence for each channel.

Presenting a wireless backhaul solution that exceeds 4G speed requirements with 300Mbps bandwidth.With over 20 years in wireless innovation, Proxim introduces the Tsunami™ QB-8100, an incredibly cost-effective, high performance and non-line-of-sight 4G point-to-point (PtP) wireless backhaul solution. With 300Mbps data rates in a complete "Hop-in-a-Box" solution, deployments in networks of all sizes will enjoy a quick return on investment.With incredible channel capacity & flexibility, excellent spectrum efficiency and a highly evolved prioritisation platform tailored to deliver voice, video and data applications, the Tsunami™ QB-8100 satisfies carriers, wireless service providers and government organisations with requirements for fast and reliable 4G wireless backhaul.Leveraging the advantages of OFDM and the latest MIMO radio innovations, the Tsunami™ QB- 8100 draws on Proxim's proprietary. Wireless Outdoor Router Protocol (WORP) to deliver wireless performance in excess of 4G products on the markets today.

The Vi1316VPD is a passive "pass-through" device that combines video, PTZ data, and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment.  It supports up to 16 cameras and is designed to be installed in the wiring closet or control room.  The VI1316VPD receives low-voltage camera power from any third-party multi-output Class 2 power supply.  Each camera power output is equipped with a self-resetting fuse for extra protection.

The ComNet VDSLMS-2 consists of one each 10/100TX 8-port managed switch, one each 2-channel EoVDSL uplink modem, and a mounting chassis, to easily and inexpensively aggregate Ethernet-enabled equipment at remote field locations back to a central or head-end location over existing copper infrastructure.

ComNet CNMCSFPPOE/M mini ethernet media converter accepts a 10/100 or 1000 Mbps electrical input and converts this to a 100 or 1000 Mbps optical output (selected by a dip switch) and the 100/1000 Mbps optical input back to the 10/100/1000 Mbps electrical output. “Auto-Negotiating” is supported on the copper interface side. The device uses either one or two optical fibres, depending upon the selection of SFP optical module.

The Vigitron Vi6132 is a 32-port active receiver hub that receives high-resolution colour or B&W video over unshielded twisted pair wires.  Category 2-7 at distances up to 6,000 feet (1830 m) when used with Vigitron Vi6100VT Active Transmitter.  It can be used with any Vigitron passive transceiver for distances up to 3,500 feet (1060 m).

BreezeMAX Extreme 3600 is an all outdoor zero footprint WiMAX 16e wireless broadband solution for a variety of markets, utilising the 3.6 - 3.8 GHz frequency range and is part of Alvarion's carrier-class, field proven BreezeMAX product family. This base station is designed for many applications and business models and offers advanced air-protocol capabilities, superior performance and standard protocol support. With an integrated antenna, ASN gateway and GPS receiver, BreezeMAX Extreme 3600 is designed for ease-of-deployment and reduced total cost of ownership. BreezeMAX Extreme 3600 offers easy configuration and a self-sustained ecosystem, ideally suited for operators, municipalities, utilities, enterprises and public safety networks. All-outdoor, zero footprint solution for easy deploymentThe compact design of BreezeMAX Extreme 3600 enables reduced CAPEX and OPEX for low Total Cost of Ownership (TCO) and accelerated ROI. This all-in-one solution integrates the base station, antenna, ASN gateway and GPS receiver to provide an all outdoor solution that is easy to deploy on communication towers, rooftops and street light poles. Enhanced coverage and capacity capabilities and advanced air protocol techniquesBreezeMAX Extreme 3600 provides MIMO A/B and MRRC advanced antenna techniques with up to 2x10 MHz to deliver high-capacity broadband services. Designed with state-of-the-art OFDMA and error correction coding techniques (leveraging 16e PHY), as well as an integrated spectrum analyser, BreezeMAX Extreme 3600 offers best Non-Line-of-Sight (NLOS) and interference resilience. Leverage WiMAX 16e QoS gives enhanced and swift delivery of triple play services featuring inherent WiMAX QoSBreezeMAX Extreme 3600 enables simultaneous support of multiple applications, using service differentiation for real-time triple play (voice, video and data) applications. BreezeMAX Extreme 3600 supports a wide range of applications - traffic control, emergency services, transportation video surveillance, public safety utilities, government, municipalities and education, oil, gas and mining, shopping malls, data and voice for residential applications, internet cafes, WiFi, data and voice for businesses and private networks.Benefit from WiMAX 16eBreezeMAX Extreme 3600 brings state-of-the-art standardised technology to the 3.6 - 3.8 GHz frequency range. BreezeMAX Extreme 3600 is designed to support interoperability and certification and complies with WiMAX Forum guidelines, enabling ecosystems to benefit from WiMAX 16e economy-ofscale.Efficient delivery of broadband applications to any environmentBreezeMAX Extreme 3600 supports unmatched sector capacity, coverage and deployment variety for enhanced implementation of fixed, nomadic and mobile applications in rural and urban deployments. It is the ideal choice for WISPs, municipalities, utilities, enterprises and public safety networks.    

The Vigitron VI6008HR, VI6016HR, VI6032HR are 8, 16, and 32-port active video receiver HUBs.  They receive  colour and B&W video over 6000 feet (2000 m) of point-to-point unshielded twisted pair (UTP) wires.  These HUBs are used with VI6000VT (for up to 6000 ft) or any Vigitron passive transceivers such as VI1000 (for up to 3000 ft) transceivers.  The distance for each channel is adjustable using a single potentiameter.  A green LED indicates video presence for each channel.

The Vigitron Vi6104 is a 4-port active receiver hub that receives high-resolution colour or B&W video over unshielded twisted pair wires. Category 2-7 at distances up to 6,000 feet (1830 m) when used with Vigitron Vi6100VT Active Transmitter.  It can be used with any Vigitron passive transceiver for distances up to 3,500 feet (1060 m).

1 channels, TX, RS-485/RS-422, RS-232, RJ-45, PAL, NTSC, 6.5, 907.18, 178 x 443 x 203, 100 ~ 240 V AC, -40 ~ +74, 0 ~ 95, 1 Vpp, 75 Ohm

Send an IP Video Signal, or any TCP/IP Device, over Existing Coaxial Cable. Active System, Includes the Transmitter, Receiver and Power Supply Units. Plug and Play for Easy Connectivity. Long Range Transmission up to 800 Metres (Max).

The Vigitron VI6008HR, VI6016HR, VI6032HR are 8, 16, and 32-port active video receiver HUBs.  They receive  color and B&W video over 6000 feet (2000 m) of point-to-point unshielded twisted pair (UTP) wires.  These HUBs are used with VI6000VT (for up to 6000 ft) or any Vigitron passive transceivers such as VI1000 (for up to 3000 ft) transceivers.  The distance for each channel is adjustable using a single potentiameter.  A green LED indicates video presence for each channel.

The VBS 2000 series offers a complete range of low-cost fiber optic video transmitters and receivers. Built-in Automatic Gain Control (AGC) allows plug-and-play installation and maintenance-free operation. VBS transmitters and receivers are available in stand-alone or rack-mount housings for both single-mode and multimode applications. 

Wi2 offers the ultimate IP wireless broadband solution for a variety of applications and services - anytime, anywhere. Wi2 provides the best of both worlds: Easy-to-deploy outdoor Wi-Fi mesh access solution integrated with built-in management and OSS support Readiness for immediate connection with the robust QoS capabilities of a BreezeMAX/BreezeACCESS backhauling network providing Personal Broadband services. Services delivered with Wi2 range from basic public Internet access to public safety, traffic management, video surveillance, indoor coverage and other advanced voice, video and mobile applications.

The Vi1408VPD is a device that combines video, PTZ data, and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment.  It supports up to 8 cameras and is designed to be placed at a location between the cameras and control room to extend the video up to 3,000 feet.  The Vi1408VPD has 8-ch fully isolated class II built-in 28/24 VAC power supply.  Each camera power output is equipped with a glass fuse.  All fuses are accessable from front.

It has 6-38* GHz Frequency band support. Wide band support from 7-56MHz RF channel and widths. Supports QPSK/16QAM/32QAM/64QAM/128QAM/256QAM modulation schemes. High Tx power radio. Low noise figure, low phase noise and high linearity. Compact and lightweight design, the smallest IDU in its class. Very high frequency stability +/- 5 ppm.

The ComNet™ CNMCSFP/M is a single channel Ethernet converter from electrical to optical and optical to electrical. This device accepts a 10/100 or 1000 Mbps electrical input and converts this to a 100 or 1000 Mbps optical output, selected by a dip switch, and the 100/1000 Mbps optical input back to the 10/100/1000 Mbps electrical output.

Tsunami® QB 8250 Link, 300 Mbps, MIMO 2x2, 23 dBi Integrated Antenna (Two QB-8250-EPR)

Wi2 offers the ultimate IP wireless broadband solution for a variety of applications and services - anytime, anywhere. Wi2 provides the best of both worlds: Easy-to-deploy outdoor Wi-Fi mesh access solution integrated with built-in management and OSS support Readiness for immediate connection with the robust QoS capabilities of a BreezeMAX/BreezeACCESS backhauling network providing Personal Broadband services. Services delivered with Wi2 range from basic public Internet access to public safety, traffic management, video surveillance, indoor coverage and other advanced voice, video and mobile applications.

Altronix HubWayEX1 Active UTP Transceiver Module employs automatic gain control (AGC) to transmit UTP video and RS422/RS485 data over a single CAT-5 or higher structured cable. Unit provides a single camera channel in a compact insulated housing. Video transmission range is up to one (1) mile max.

BreezeCOMPACT provides wireless broadband in fixed and mobile environments for both outdoor and indoor end-user devices. Its small form factor and cost-efficiency makes it ideal for budget-aware business environments. It enables coverage and capacity extension in areas where multi-sector Macro BS is not required.  

Built in surge supression.