Analog Transmission Systems  (757)

Wi2 offers the ultimate IP wireless broadband solution for a variety of applications and services - anytime, anywhere. Wi2 provides the best of both worlds: Easy-to-deploy outdoor Wi-Fi mesh access solution integrated with built-in management and OSS support Readiness for immediate connection with the robust QoS capabilities of a BreezeMAX/BreezeACCESS backhauling network providing Personal Broadband services. Services delivered with Wi2 range from basic public Internet access to public safety, traffic management, video surveillance, indoor coverage and other advanced voice, video and mobile applications.

The Vi1051VP is a passive device that transports video and camera power over a single Category 5 cable for distances up to 750 ft. (228 m).

The ComNet CNFE2MC2C[/M] Ethernet media converter is designed to transmit and receive 10/100 Mbps data and two bi-directional contact closures over multimode or single mode optical fiber using sold-separately SFP modules to select distance and connector type.

The Vi1054VP is a passive video transmitter (non-amplified) device that includes a 24 VAC to 12 VDC converter to power cameras  for distances up to 3,000 feet (930 m) over a single Cat-5 cable. Its compact size makes it easy to be mounted directly in the back cameras for a variety of applications.  The power distribution from the control room over UTP will be 24 or 28 VAC. The Vi1054VP makes it possible to use 12 VDC cameras in a 24 VAC power system.

UTP / CAT 5 transmission, 8 channels, 8, 482 x 44 x 170, 400 mA, 12V DC, 0 ~ +40, 20 ~ 80, 1V p-p, 100-105 Ohm (Balanced)

monochrome 90deg c/w illum. IR. Part no 220356.

The ComNet CNMCSFP electrical-to-optical Ethernet media converters accept a 10/100 or 1000 Mbps electrical input and converts this to a 100 or 1000 Mbps optical output (selected by a dip switch) and the 100/1000 Mbps optical input back to the 10/100/1000 Mbps electrical output. “Auto-Negotiating" is supported on the copper interface side.

Alvarion's BreezeACCESS VL is a flexible and field proven Point-to-Multi-Point (PtMP) solution providing broadband wireless outdoor connectivity for a variety of applications in urban and rural deployments. Available in a range of frequencies in the 5 GHz and 900 MHz bands, this widely deployed platform offers a carrier-class outdoor link with enhanced security and capacity as well as top QoS for data, voice and video services. BreezeACCESS VL supports a wide range of subscriber units, providing an optimised solution for the performance and cost requirements of various markets and customers. It enables operators, municipalities, enterprises and communities around the world to quickly and cost-effectively benefit from an array of top quality broadband services.  

Alvarion's BreezeACCESS VL is a flexible and field proven Point-to-Multi-Point (PtMP) solution providing broadband wireless outdoor connectivity for a variety of applications in urban and rural deployments. Available in a range of frequencies in the 5 GHz and 900 MHz bands, this widely deployed platform offers a carrier-class outdoor link with enhanced security and capacity as well as top QoS for data, voice and video services. BreezeACCESS VL supports a wide range of subscriber units, providing an optimised solution for the performance and cost requirements of various markets and customers. It enables operators, municipalities, enterprises and communities around the world to quickly and cost-effectively benefit from an array of top quality broadband services.  

Tsunami MP 8200 Subscriber Unit, 300 Mbps, MIMO 3x3, Type-N Connectors

Tsunami® QB 8200 Link, 300 Mbps, MIMO 3x3, Type-N Connectors (Two QB-8200-EPA)

ComNet CNGE2MC 2 port ethernet media converter accepts 10/100/1000 Mbps electrical input and convert this to a 1000 Mbps (1Gbs) optical output. The LED indicators confirm operational status. The CNGE2MC is environmentally hardened with no electrical or optical adjustments.

Alvarion's BreezeACCESS VL is a flexible and field proven Point-to-Multi-Point (PtMP) solution providing broadband wireless outdoor connectivity for a variety of applications in urban and rural deployments. Available in a range of frequencies in the 5 GHz and 900 MHz bands, this widely deployed platform offers a carrier-class outdoor link with enhanced security and capacity as well as top QoS for data, voice and video services. BreezeACCESS VL supports a wide range of subscriber units, providing an optimised solution for the performance and cost requirements of various markets and customers. It enables operators, municipalities, enterprises and communities around the world to quickly and cost-effectively benefit from an array of top quality broadband services.  

The ComNet CNFEVCNMC small size Ethernet in-dome media converter is designed to transmit and receive 10/100 Mbps data over one multimode or single mode optical fiber with ST connectors. The CNFEVCNMC electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments.

Vigitron received enthusiastic responses for the introduction of the new MaxiiCopper Ethernet Extender Family at IFSEC 2010, and maintains its position at the vanguard of CCTV product innovations. The new Vigitron MaxiiCopper Ethernet Extender line includes both single and multi-channel, rack mountable models. These revolutionary transmission devices extend High-Speed Ethernet connections over long UTP and coax infrastructures beyond the traditional 100 meter limit. A pair of MaxiiCopper Ethernet Extenders establishes a full-duplex, full-rate Ethernet connection up to 1,680 meters at 10Base-T or 640 meters at 100Base-T. Vigitron also offers analogue line that transport video, data and power over unshielded twisted pair (UTP) wires, from single to 32 channels models working up to 1,980 meters for a wide variety of applications. The new active receiver Hubs with the Automatic Video Compensation (AVC) feature provide plug-and-play and zero adjustment video connection. In addition, Vigitron produced a series of high quality Video Isolation Transformers, designed to eliminate the longitudinal hum caused by earth loop currents. With Vigitron any project has the flexibility to expand or implement analogue CCTV system or begin the transition to IP CCTV network with ease. Vigitron products remain to be the benchmark for the most compact and scalable design in the industry. Vigitron is a leading manufacturer of innovative transmission solutions for the global security and IT market. Our products enable you to use your copper infrastructure for either analogue or IP CCTV systems at extended distances. We are committed to employing state of the art technology to offer the best products at exceptional value, accompanied by excellent customer service. We bring you the future now. For additional information on the advantages of Vigitron products, contact us at 888-574-8942, e-mail [email protected], or visit www.vigitron.com.

The ComNet CWGE28FX4TX24MS Layer 2 Managed 28 Port Ethernet Switch supports twenty-four (24) 10/100/1000BASE-TX ports and four (4) 1000BASE-FX ports of Ethernet data. The four 1000BASE-FX ports are SFP* configurable for fiber type (multimode or single-mode), connector type and distance.

Proxim Wireless Corporation, a leading provider of complete outdoor wireless backhaul systems, recently announced that it is now accepting orders for its new Tsunami™ 8200 series of products.   Latest innovation in a long line Proxim has been in the wireless broadband business for over 20 years and has launched a large number of innovative products during that time.  In that period, it has shipped over 2 million wireless products to over 250,000 customers world-wide. Through this experience, Proxim has developed an intimate knowledge of wireless products and, more importantly, what its customers need from wireless products to succeed in their businesses.  In developing the 8200 series of products, Proxim has utilized all of its in-depth knowledge of wireless products and real-world customer needs to create yet-another industry-leading product line.  8200 product line features The heart of the 8200 product line is a versatile high-performance wireless platform.  Common key building blocks are used to create the different products within the 8200 product line.  This enables Proxim to pass the resulting efficiencies on to its customers through very cost-effective pricing.  Applications Proxim’s 8200 products are ideally suited for a wide variety of high-bandwidth, high availability applications including: Video cameras – increasing protection and security by enabling the quick and inexpensive installation of video cameras where desired Intelligent traffic systems – reducing congestion by synchronizing traffic lights Wireless broadband access – enabling quick and inexpensive broadband Internet connectivity

Extends Ethernet Networks beyond 100m limitation for CCTV and IT projects: 10BaseT by up to 5,000 feet (1,524m) and 100BaseT by up to 2,100 feet (640m).

Extends Ethernet Networks beyond 100m limitation for CCTV and IT projects: 10BaseT by up to 5,000 feet (1,524m) and 100BaseT by up to 2,100 feet (640m).

ComNet CWFE2COAX dual channel ethernet over coax supports high-speed Ethernet transmission over standard 75 ohm coaxial cable circuits, at data rates of 100 Mbps, and transmission distances of up to 305 meters. It contains two independent channels in a single standard-sized enclosure.

Combining a Vi2400 series extender with Vigitron’s MaxiiCollector™ Vi2804 Extended Ethernet Switch, up to 4 cameras can be transmitted to a central location on a single cable. The Vi2408 and Vi2416 are offered in EIA 19” 1U high rack for easy installation.

The ComNet CNFEMCPOE Ethernet media converter is designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP* modules. These models require the ordering of sold-separately interchangeable SFP modules for fiber type, distance and connectors.

The Vigitron Vi1001F and Vi1001M are passive transmission devices that transport video signals over unshielded twisted pair wires, point-to-point, for distances up to 1,000 ft. (305 m)*. Distances up to 3,000 ft. (915 m) can be achieved when it is used with Vigitron Active Receivers. They use Category 2-7 twisted pair wires, are easy to install and cost effective, and do not require power. The Vi1001F and Vi1001M's unique and compact design allows mounting directly to the video source or receiver without needing any additional cabling. They are compatible with all qualified cameras with built-in twisted pair transmitter. The Vi1001F and Vi1001M have built-in surge suppression to protect video equipment against damaging voltage spikes. Their crosstalk and noise immunity ensure quality video signals. The Vi1001F and Vi1001M offer quality video in a compact size. They are ideal for a wide variety of security and surveillance applications.

Vigitron’s ViewMate is a compact but powerful tool for installing and troubleshooting POE enabled IP cameras. When connected, ViewMate passes the POE power from the “POE In” Ethernet port to the remote POE device, and the “Monitor” port provides direct network connection from the remote POE camera to a local laptop for focousing and setting up POE enabled IP cameras.

The Vigitron Vi1001F and Vi1001M are passive transmission devices that transport video signals over unshielded twisted pair wires, point-to-point, for distances up to 1,000 ft. (305 m)*. Distances up to 3,000 ft. (915 m) can be achieved when it is used with Vigitron Active Receivers. They use Category 2-7 twisted pair wires, are easy to install and cost effective, and do not require power. The Vi1001F and Vi1001M's unique and compact design allows mounting directly to the video source or receiver without needing any additional cabling. They are compatible with all qualified cameras with built-in twisted pair transmitter. The Vi1001F and Vi1001M have built-in surge suppression to protect video equipment against damaging voltage spikes. Their crosstalk and noise immunity ensure quality video signals. The Vi1001F and Vi1001M offer quality video in a compact size. They are ideal for a wide variety of security and surveillance applications.

ComNet CNFEVCNEOC in-dome ethernet over COAX module supports high-speed Ethernet transmission over standard 75 ohms coaxial cable circuits, at a data rate of 100 Mbps, and transmission distances of up to 305 meters. This in-dome module is the perfect solution for upgrading an existing coaxial cable plant for use with Ethernet. The unit is configured to operate in remote mode and is intended to be paired with a compatible Ethernet over coax extender operating in Master mode and in 100Mbps mode.

ComNet VDSL3 consists of one each 10/100TX 8-port managed switch, one each 2-channel EoVDSL uplink modem, and a mounting chassis, to easily and inexpensively aggregate Ethernet-enabled equipment at remote field locations back to a central or head-end location over existing copper infrastructure. The VDSL3 is the perfect solution for upgrading a legacy twisted copper or coaxial cable plant for use with Ethernet, when compared to the significant costs of installing new network cabling. Utilising the latest generation VDSL2 technology for the fastest data rate and greatest transmission distance, any standard telephone-grade twisted copper pair, legacy serial cabling, or standard 75Ω coaxial cable may be used.

UTP / CAT 5 transmission, 305, NTSC, PAL, SECAM, 60, 7, 47 x 14 x 14, -10 ~ +70, 0 ~ 95, 75

55, 7 ~ 12 V DC

The product has non-line-of-sight and advanced features, widest range of frequencies, carrier-grade security and part of the product family.

Altronix HubWayEX16 Active UTP Transceiver Hub employs automatic gain control (AGC) to transmit UTP video, RS422/RS485 data over a single CAT-5 or higher structured cable. Units provide either 16 camera channels in a space saving 1U EIA 19" rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to one mile max. per channel. Units are compatible with fixed or PTZ cameras. Each grouped camera channel provides video transmission for up to four (4) cameras over a single CAT-5 or higher structured cable. This permits the installation of up to sixteen (16) cameras at remote locations over four (4) CAT-5 or higher structured cables.

Vigitron’s MaxiiCollector™ Vi2804 Extended Ethernet Switch, up to 4 cameras can be transmitted to a central location on a single cable. The Vi2408 and Vi2416 are offered in EIA 19” 1U high rack for easy installation.

Altronix HubSat4D Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 4 camera channels in a wall mount enclosure. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv or HubWayDv Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression. Optionally, the HubSat4D can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay, HubWayLD or HubWayLDH Passive and Active UTP Transceiver Hubs. In addition, the HubSat4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Altronix HubWayEX32 Active UTP Transceiver Hub employs automatic gain control (AGC) to transmit UTP video, RS422/RS485 data over a single CAT-5 or higher structured cable. Units provide 32 camera channels in a space saving 1U EIA 19" rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to one mile max. per channel. Units are compatible with fixed or PTZ cameras. Each grouped camera channel provides video transmission for up to four (4) cameras over a single CAT-5 or higher structured cable. This permits the installation of thirty-two (32) cameras at remote locations over eight (8) CAT-5 or higher structured cables.

Altronix HubSat8D Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8 camera channels in a wall mount enclosure. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv,HubWayDv or HubWayDvi Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC fuse protected outputs with surge suppression. Optionally, the HubSat8D can be used as an accessory module to transmit video from up to 8 cameras over a single CAT-5 or higher structured cable back to the HubWay, HubWayLD or HubWayLDH Passive and Active UTP Transceiver Hubs. In addition, the HubSat8D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

ComNet CNFE1EOC-M mini modem supports Ethernet over twisted pair or coaxial cable, at data rates of up to 90 Mbps. Ethernet data may be transmitted over a telephone-grade twisted copper pair, legacy serial cabling, or standard 75 ohm coaxial cable circuits, making this unit ideal for those applications where it is desired to utilise an existing installed base of copper wiring for Ethernet transmission.

ComNet CKFE1COAX ethernet-over-coax extender consists of a pair of CLFE1COAX which support one channel of 100Mbps Ethernet as well as Pass-through Power over Ethernet (PoE) over standard 75Ω coaxial cable. The unit supports transmission distances of up to 5,000 feet (1524m) at 10 Mbps, or 1800 feet (548m) at 100 Mbps.

Supports the frequency bands from 5.900 - 6.425 GHz. Features an integrated dual polarity panel antenna and a 2x2 MIMO high power radio capable of up to 26dBm transmit power. Carrier grade advanced security with AES-128 bit encryption and built-in feature-rich network protocols for bridging, routing and gateway functionality. Reduce costs of wireless ISP. All-in-One CPE with security & gateway features.

Complete "Hop-In-A-Box" allows unprecedented ease of installation. Synergy with Tsunami MP.11 point-to-multipoint systems. Advanced security protects privacy.