Analog Transmission Systems  (629)

Vicon KOL-iRAID24 RAID array device provides a high-density storage solution that can be used for primary and/or backup data storage. It is reconfigured at the factory for RAID 5 storage and can be set up to support up to 4 NVRs or DVRs each. No special power requirements are necessary, it operates with 115/230 VAC input power.

The HNVE130A is a cost effective way to leverage existing investment in analog video equipment while upgrading overall video surveillance system to a networked IP solution. For new video installations, the encoder will allow network video systems to be designed with the users choice of analog cameras that fit the performance needs of the application. The single channel design of the encoder with a rackmount accesory also makes it perfect for remote applications or centralized video control rooms.

1 channels, 1, MPEG4, PAL, NTSC, 720, 500, 90 x 120 x 35, 4 W, 12 V DC, 5 ~ 55, 8 ~ 90

NETTUNO MINI is a new, standalone, non-PC based, compact, solid state, fully embedded video codec capable of encoding video and audio from an analogue video/audio source in real time.

30 Watt amplifier including 1 x 30W external horn (900m sq. coverage). Part no VSAH04.

For all Fastscan and Axiom products. Part No 220253.

Part no 220428.

PC control for Fastscan receivers. Part no 220309.

VM53 connects to the modem port of the Fast Scan and converts the modem port's electrical interface from RS232/V.24 to 10BaseT or 100BaseTX format. Part no 200116.

adaptor, for use with ISDN X21 T/A's. Part no 221011.

30 watt. Part number VSASH.

128K ISDN 2 terminal adapter for Fastscan. Part Number 225128.

VM23 intercom handset, direct connection to VST10CAplus equipment, wall mount, usable with VM22 and VM22A audio switchers.

64k ISDN adaptor (does not require VM52S. Part numbers 225263 and 225263/P (to use with video central).

64K ISDN terminal adapter for Fastscan. Part Number 225264.

modem for all VST10s (28.8Kbits/sec). Suitable for PSTN and 2-wire leased line

19" rack mount. Ten momentary closure membrane switches connect to the Fast Scan Receiver to control remote site equipment such as lights, gates etc.

VM21 relay card, plug-in, provides 10 n/o relay contact Fastscan outputs. Increasing the current switching rating of the standard FastScan Alarm/Control Outputs is achieved with the use of an ADPRO ® VM21 Relay Card. The VM21 provides mechanical relay contacts for each Alarm/Control Output as well as a General Relay Output on all Fast Scan models. (Part no is 220295).

x21 modem adaptor for Fastscan (requires CITAM64)

The TW3001AR is a single-channel active receiver that can receive live video over unshielded twisted pair (UTP) cable. The adaptive technology in the  TW3001AR automatically adjusts the low, medium, and high frequency components of the video signal.

The TW3032P is multichannel video transceivers can transmit multiple video signals over unshielded twisted pair (UTP) cable. The transceivers are available with 8, 16, or 32 channels and can be mounted into an industry standard 19-inch (48.26 cm) wide equipment rack. The transceivers can be used at the camera and/or monitoring location.

The TW3001P video transceiver is a single-channel balun that sends full motion video (color/black and white) and coaxitron PTZ control signals over a single, unshielded twisted pair (UTP) cable. Its passive design eliminates the need for external power.

Converts DTMF Serial telemetry from DVST transmitter to c-bus.

2x X21 Ascom ISDN Terminal adaptor. For DFT150/175 without built in TA and all DFT200/100 models.

transmission for DFT150/175/200 over ISDN.

The  TW3001AT is a single-channel active transmitter that can transmit live video over unshielded twisted pair (UTP) cable. The TW3001AT allows for multiple applications. For example, it can be connected to a matrix switcher, such as the CM6800, via a Pelco passive transceiver.

ALM-2 optional plug-in alarm box for use with all DFT transmitters (EC version available). Provides 6 heavy duty relay outputs.

DVST Control keyboard

Terminal adapter cable, connects DFT products to X21 terminal adapters 2 needed for each TA (MIDAS,CITAM). Extension Cable, 15way D Socket to 15way D plug.

Fastscan IIICA wal mount Colour TX and Audio Transmitter with 180 pre-alarms requires 12 V DC PSU @ 2A. Resolution: 928 x 576, 928 x 288, 464 x 288, 304 x 288, 232 x 288 (PAL/CCIR). PTZ control, external control via VM86 and expandable to 100 channels. Part No (internal) is 200147.

PelcoNet transmits (NET300T) or receives (NET300R) live video and data across existing Ethernet networks. The NET300 can display video on a PC using Internet Explorer, an analog monitor, or both.

PelcoNet transmits (NET300T) or receives (NET300R) live video and data across existing Ethernet networks. The NET300 can display video on a PC using Internet Explorer, an analog monitor, or both.

Fastscan IIICA Rack Mountable, colour and audio, Tranceiver TX/RX and PTZ. Resolution: 928 x 576, 928 x 288, 464 x 288, 304 x 288, 232 x 288 (PAL/CCIR). PTZ control, external control via VM86 and expandable to 100 channels. Part No (internal) is 200149.

Fastscan lllCA colour & audio wall mount transmitter & PTZ. Resolution: 928 x 576, 928 x 288, 464 x 288, 304 x 288, 232 x 288 (PAL/CCIR). PTZ control, external control via VM86 and expandable to 100 channels. Part No (internal) is 200152

Fast Scan 3, Rack Mount Colour TRX + Pre Alarms. Resolution: 928 x 576, 928 x 288, 464 x 288, 304 x 288, 232 x 288 (PAL/CCIR). PTZ control, external control via VM86 and expandable to 100 channels. Part No (internal) is 200144.

Licence free operation which is coded for security use. Set up and test mode incorporated with a selectable lock out timer.

19" twisted pair sender/receiver system. Quick and easy alignment. Pre-set adjustments via DIP-switch. LED display for output level. Galvanic decoupling of input signals. Communication connection already integrated.

Licence free operation which is coded for security use. Set up and test mode incorporated with a selectable lock out timer. Uses 4 x D (Alk) Batteries.

Integrated listening ability assists in the alarm verification process, while transmission of the operator's voice to the site provides instant intruder control. ADPRO ® FastVu TM uses sophisticated audio compression techniques to ensure that high-quality, bi-directional audio uses the minimum possible bandwidth of the communications channel. (Part number is 200710).

Integrated listening ability assists in the alarm verification process, while transmission of the operator's voice to the site provides instant intruder control. ADPRO ® FastVu TM uses sophisticated audio compression techniques to ensure that high-quality, bi-directional audio uses the minimum possible bandwidth of the communications channel. (Part number is 200710).