Analog Transmission Systems  (629)

Radiowave transmission system which can also be used with microwave technology. Radiated power 50mV / m@ 3m. Omni directional type antenna.

Radiated Power- 50 mV/m @ 3m, range with optional 14dB Rx antenna- 1 mile. Dimensions: Transmitter: 5.25" x 2.30" x 1.25", receiver: 4.5" x 7.25" x 20". Kit includes: One mini Video Transmitter, One wireless Video Receiver, Two 12VDC power supplies. One 2.4GHz rubber duck antenna. One AA battery pack holder, One set of RCA cables. $ channels with varying frequencies: Channel #1- 2.4338 GHz, Channel #2- 2.4528 GHz, Channel #3- 2.4728 GHz, Channel #4- 2.4108 GHz. Indoor Tx versions also avialable.

Radiated Power- 100 mV/m @ 3m, range with optional 14dB Rx antenna- 1 mile. Dimensions: Transmitter: 5.25" x 2.30" x 1.25", receiver: 4.5" x 7.25" x 20". Kit includes: One mini Video Transmitter, One wireless Video Receiver, Two 12VDC power supplies. One 2.4GHz rubber duck antenna. One AA battery pack holder, One set of RCA cables. $ channels with varying frequencies: Channel #1- 2.4338 GHz, Channel #2- 2.4528 GHz, Channel #3- 2.4728 GHz, Channel #4- 2.4108 GHz. Indoor Tx versions also avialable.

Radiated Power- 900 mV/m @ 3m, range with optional 14dB Rx antenna- 1 mile. Dimensions: Transmitter: 5.25" x 2.30" x 1.25", receiver: 4.5" x 7.25" x 20". Kit includes: One mini Video Transmitter, One wireless Video Receiver, Two 12VDC power supplies. One 2.4GHz rubber duck antenna. One AA battery pack holder, One set of RCA cables. $ channels with varying frequencies: Channel #1- 2.4338 GHz, Channel #2- 2.4528 GHz, Channel #3- 2.4728 GHz, Channel #4- 2.4108 GHz. Indoor Tx versions also avialable.

Full-motion monochrome or color video receiver for distances up to: 3,000ft (1km) when used with NV-213A, NV-213A-M, NV-813A, or NV-1613A 5,280ft 1 mile (1,6km) when used with NV-653T transmitter and Cat-2 or 3 wire 8,000ft 1.5 miles (2,4km) when used with NV-653T transmitter and Cat-5 wire. Network Wiring: One Unshielded Twisted Pair 24 AWG (0,5 mm) or thicker. Impedance: 100 ± 20 ohms. Built-in transient protection & ground lifting. Built-in brightness & sharpness controls; blue power LED, green active LED. Compatible with qualified UTP cameras. Rack mountable.

The series 170 is a miniature video transmitter module and three channel Eurocards/Box for multimode fibre. Fully compatible with 50/125 and 62.5/125 fibre. Fully compatible with COE 3170BVUAC racking system. Optical AGC automatically adjusts optical levels.

Full-motion monochrome or color video receiver for distances up to: 3,000ft (1km) when used with NV-213A, NV-213A-M, NV-813A, or NV-1613A 5,280ft 1 mile (1,6km) when used with NV-653T transmitter and Cat-2 or 3 wire 8,000ft 1.5 miles (2,4km) when used with NV-653T transmitter and Cat-5 wire. Network Wiring: One Unshielded Twisted Pair 24 AWG (0,5 mm) or thicker. Impedance: 100 ± 20 ohms. Built-in transient protection & ground lifting. Built-in brightness & sharpness controls; blue power LED, green active LED. Compatible with qualified UTP cameras. Rack mountable.

Mono or colour non-amplified video transceiver hub to be used with the NV-213A, NV-213A-M, NV-813A, or NV-1613A as a rack- mountable passive transmitter or receiver at distances up to 1,000ft (300m) and used with the NV-652R, NV-862R, or NV-1662R as a rack-mountable passive transmitter for distances up to 3,000ft (1km). Network Wiring: One Unshielded Twisted Pair 24 AWG (0,5 mm) or thicker. Impedance: 100 ± 20 ohms. Built-in transient protection & ground lifting. Built-in brightness & sharpness controls; blue power LED, green active LED. Compatible with qualified UTP cameras. Rack mountable.

OT Systems ET1111-A-MT is an industrial 10/100Base-TX to 100Base-FX Ethernet media converter. It features Full/Half duplex, Auto-Negotiation as well as Multimode dual-core fibre with SC connectors. It supports MDI/MDI-X Auto-Crossover. Thanks to the sleek Microtype design, it fits within most camera housing.

Real time CCTV video at distances up to 300m when used with a NV-213A, NV-413A, NV-813, NV-1613 or NV-3213A or up to 1,000m with active receivers. Supports "up-the-coax" type control signal. Exceptional interference rejection. Male BNC on the NV-211T-M allows connection directly to the camera. Built-in surge protection.

The Differential Gain and Phase is less than of 2% and 2°, respectively. Systems optionally support bi-directional data channels of RS-232C, RS-422, or TTL at up to 19.2 Kbps.

The Differential Gain and Phase is less than of 2% and 2°, respectively. Systems optionally support bi-directional data channels of RS-232C, RS-422, or TTL at up to 19.2 Kbps.

X-Net 4 x simplex video channel transmit/receive module, including 1 x 10/100 BaseT Ethernet, 1 x duplex data, 1 x duplex contact closure channel. Utilises 1 rack/box slot. 

The Differential Gain and Phase is less than of 2% and 2°, respectively. Systems optionally support bi-directional data channels of RS-232C, RS-422, or TTL at up to 19.2 Kbps.

The Differential Gain and Phase is less than of 2% and 2°, respectively. Systems optionally support bi-directional data channels of RS-232C, RS-422, or TTL at up to 19.2 Kbps.

The Differential Gain and Phase is less than of 2% and 2°, respectively. Systems optionally support bi-directional data channels of RS-232C, RS-422, or TTL at up to 19.2 Kbps.

The Differential Gain and Phase is less than of 2% and 2°, respectively. Systems optionally support bi-directional data channels of RS-232C, RS-422, or TTL at up to 19.2 Kbps.

Video Twisted Pair Receiver. Noble-gas filled search arrester, zener diodes.

Real-time multi-channel digital video recorder, multiplexer and transmission server. Built-in WebServer. Support various Pan/Tilt/Zoom control protocols (e.g. UNIVISION, PELCO,AD, LiLin, VICON, PANASONIC, PHILIPS & Elbex, Kalatel and Ultrak-Maxpro).

The Differential Gain and Phase is less than of 2% and 2°, respectively. Systems optionally support bi-directional data channels of RS-232C, RS-422, or TTL at up to 19.2 Kbps.

2 Channel, Video, Audio & Data Fiber Optic Multiplexer. The system is available with 1310nm and 1550nm wavelength Lasers for WDM application. Dense-Wave Division Multiplexing is available with 1530, 1550, 1570, 1590, 1610 and 1630nm wavelength Lasers. Applications include links from studio to transmitter (STL), studio to studio, studio to CATV head- end, distance learning, satellite up and down links, common carrier transport, Telco circuits, distance learning, Intelligent Transportation Systems and back-haul feeds from special events.

4 channel, video and audio fiber optic multiplexer. The system is available with 1310nm and 1550nm wavelength Lasers for WDM application. Dense-Wave Division Multiplexing is available with 1530, 1550, 1570, 1590, 1610 and 1630nm wavelength Lasers.

The NVT Model NV-3262R is a 32-port active (amplified) device that allows the reception of real-time monochrome or color video up to one mile (1,6km) or Category-2 or 3 Unshielded Twisted-Pair (UTP) or up to 1.5 miles (2,4km) NTSC of Category-5. Baseband (composite) signals of any type are supported.

Built-in automatic gain control allows plug and play installation and maintenance free operation.  VBS transmitter and receivers are available in stand-alone or rack-mount housings for both single-mode and multimode applications.  The VBS 2020 TX/RX-3 transmission systems can provide up to 33 video transmission links, using only a single MC 11 power supply cabinet at each location.

Compact PCI video codec board providing real-time capture, processing, encoding or decoding of four full resolution video channels. Transmits over IP / ATM. Requires Pentium III 300 MHz, 100 or 1000 Mbps Ethernet network adapter board and 155 or 622 Mbps ATM Network adapter board, CDRom, HDD. Compatible with VisioWave Security Software Modules.

Provides transmission of 4 video channels, 2 duplex 128kbps data channels, 2 CD quality duplex audio channels and 2 contact closure channels on one singlemode or multimode optical fibre. 

Mono or colour non-amplified video transceiver hub to be used with the NV-213A, NV-213A-M, NV-813A, or NV-1613A as a rack- mountable passive transmitter or receiver at distances up to 1,000ft (300m) and used with the NV-652R, NV-862R, or NV-1662R as a rack-mountable passive transmitter for distances up to 3,000ft (1km). Network Wiring: One Unshielded Twisted Pair 24 AWG (0,5 mm) or thicker. Impedance: 100 ± 20 ohms. Built-in transient protection & ground lifting. Built-in brightness & sharpness controls; blue power LED, green active LED. Compatible with qualified UTP cameras. Rack mountable.

Real-time multi-channel digital video recorder, multiplexer and transmission server. Built-in WebServer. Support various Pan/Tilt/Zoom control protocols (e.g. UNIVISION, PELCO,AD, LiLin, VICON, PANASONIC, PHILIPS & Elbex, Kalatel and Ultrak-Maxpro).

Real-time multi-channel digital video recorder, multiplexer and transmission server. Built-in WebServer. Support various Pan/Tilt/Zoom control protocols (e.g. UNIVISION, PELCO,AD, LiLin, VICON, PANASONIC, PHILIPS & Elbex, Kalatel and Ultrak-Maxpro).

Real-time multi-channel digital video recorder, multiplexer and transmission server. Built-in WebServer. Support various Pan/Tilt/Zoom control protocols (e.g. UNIVISION, PELCO,AD, LiLin, VICON, PANASONIC, PHILIPS & Elbex, Kalatel and Ultrak-Maxpro).

The NVT NV–3213A is a 32-port passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

Real-time multi-channel digital video recorder, multiplexer and transmission server. Built-in WebServer. Support various Pan/Tilt/Zoom control protocols (e.g. UNIVISION, PELCO,AD, LiLin, VICON, PANASONIC, PHILIPS & Elbex, Kalatel and Ultrak-Maxpro).

Real-time multi-channel digital video recorder, multiplexer and transmission server. Built-in WebServer. Support various Pan/Tilt/Zoom control protocols (e.g. UNIVISION, PELCO,AD, LiLin, VICON, PANASONIC, PHILIPS & Elbex, Kalatel and Ultrak-Maxpro).

Mono or colour non-amplified video receiver up to 2.4 km with Cat-5 wire to be used with NVT NV-213A/A-M Video Transceiver or NV-653T Video Transmitter. Network Wiring: One Unshielded Twisted Pair 24 AWG (0,5 mm) or thicker. Impedance: 100 ± 20 ohms. Built-in transient protection & ground lifting. Built-in brightness & sharpness controls; blue power LED, green active LED. Compatible with qualified UTP cameras. Up to 10 NV-652 Rs may be rack mounted using the NV-RM8/10 Rack Panel Kit. Supports screw-terminal UTP video inputs. Distances up to 3000 ft with passive transceiver.

The Ernitec Series 65 is a range of units capable of transmitting colour and black and white video signals on twisted pair cables up to a distance of 1000 m. BVT-65 - Boxed video transmitter with built-in 115 or 230 VAC power supply. BVR-65 - Boxed video receiver with built-in 115 or 230 VAC power supply.

Mono or colour non-amplified passive video/audio transceiver. Network Wiring: One Unshielded Twisted Pair 24 AWG (0,5 mm) or thicker. Impedance: 100 ± 20 ohms. 1,000ft (300m) when used with another passive transceiver 3,000ft (1km) when used with an active receiver such as the NV-518A.

Dual Full-motion monochrome or colour video and audio (2 inputs & outputs) at distances up to: 1,000ft (300m) when used with another NV-418A; 3,000ft (1km) when used with an active receiver such as the NV-518A.

Dual full-motion monochrome or color video and audio. Distances up to 3,000ft (1km) when used with another NV-518A.

Compatible with Microprocessor, Switcher/Control Systems. Colour Compatible. Rack mount. 850 nm.

5dB Magnetic Mount Omni-Direct Portable Whip Antenna. Heavy duty 2" Magnet- 35lbs pull strength. Enclosed coil reducing wind noise. Includes 6 feet RG-58A/UD dual shield, low loss cable and connectors.