CCTV Housings  (811)

Camera Housings, Internal/External, Wall mount, Weather Resistant, with Heater, Aluminium, 252 x 85 x 75 mm, 2.4 kg, 40 W, 230 V AC

The EXPB-3W is a heavy-duty IR illuminator wall mount bracket kit complete with camera housing. It is designed for rugged outdoor applications. The thick cast aluminum construction is extremely durable and tough. Its versatile design means that it is compatible with AEGIS UFLED and AEGIS SuperLED Illuminators.

Liquid cooled camera housings are required for installations in very hot environments. When it comes to stand with very high temperatures and severe ambient conditions, like in hot industrial plants, Tecnovideo LC (Liquid Cooled) series camera housings are the most suitable solution. The housing main body is made up by two stainless steel tubes closed at their ends, forming a special chamber that allows the water or any other liquid to flow and cool down the housing. The front flange is designed to allow compressed air to be distributed all around the window to cool it down and keep it clean from dirty and dust. It's an essential protection when the housing is located in foundries, near oven or dusty and dirty hot places. The compressed air can be filtered using the ABFL-01 filtering battery, available as optional. Tecnovideo LC series comprises 129LC, for small-medium size cameras/lenses, and 168LC series for medium-large cameras/lenses, both completely constructed in AISI316L stainless steel. Both series are available for visible and for IR thermal imaging cameras. Borosilicate glass (Borofloat) front windows, with high chemical resistance and low thermal expansion, are the best solution for visible light cameras. Germanium window, with special diamond like coating (DLC), recommended for environmental temperature not higher than 100° C, and Zinc Selenide window for higher temperatures, are both available for applications using IR thermal imaging cameras. Upon request are available sapphire windows for MWIR (mid-wavelength infrared) range (3 - 5 μm). For further information, please visit the LC Series page.

The Dennard 515, 516, 517 range of environmental camera housings are designed to accommodate a wide range of camera /lens combinations and to provide protection to BS.EN 60529 Level IP 65 (no water ingress).

Dome Housings, Internal, Wall, Ceiling mount, -45 ~ +50, IP66, with Heater, Aluminium, 2,800, 75 W, 24 V AC

Dome Housings, Internal, Wall, Ceiling mount, -45 ~ +50, IP66, with Heater, Aluminium, 2,800, 75 W, 24 V AC

With reinforced thermoplastic end caps, available in 3 lengths.  Can be supplied with integral and optional heater / demisters, power supplies and transmitters to send video signals over twisted pair or fibre cables. Available with a sunshield (CHM-300M).

The Dedicated Micros DM/2000-309 has pressure die cast and sheet construction.

Camera Housings, External, Wall mount, -20 ~ +60, 0 ~ 99, IP67, Water Resistant, Sunshield, Aluminium, 395 x 145 x 130 mm, 1,690, 700 mA, 12 V DC

With reinforced thermoplastic end caps, available in 3 lengths.  Can be supplied with integral and optional heater / demisters, power supplies and transmitters to send video signals over twisted pair or fibre cables.

The LTC 9369/00 is an aesthetically designed indoor ceiling housing for CCTV camera installations.  This housing can be easily mounted in fixed or suspended ceilings and is ideal for any application where attractive and discreet CCTV monitoring is required.  The LTC 9369/00 construction consists of a tough acrylic/PVC alloy plastic cover hinged to an aluminized steel backbox.  This construction allows the LTC 9369/00 to be used in environmental air spaces or in air handling plenum of non fire-resistant ceilings.

The 129 series camera housing is constructed entirely from AISI316L stainless steel, for use in industrial and marine environments.

The type 506 housing is specifically designed to accommodate a range of C.C.D. cameras.  The enclosure incorporates a removable top cover for camera access, similar to our type 515 housing.

The LTC 9303 Series are inside corner-mounted detentiongrade security housings, designed for applications such as prisons, parking garages, and hospitals.  These housings are ideal for any application requiring secure CCTV monitoring.  For maximum protection and durability, the light weight cast aluminum design of the LTC 9303 Series housing provides the strength of 10 gauge steel, with the superior strength-to-weight ratio of aluminum.

c/w 240v AC heater/thermostat. Small.

c/w 240v AC heater/thermostat. Medium.

c/w 240v AC heater/thermostat. Large.

The Dennard 515, 516, 517 range of environmental camera housings are designed to accommodate a wide range of camera /lens combinations and to provide protection to BS.EN 60529 Level IP 65 (no water ingress).

The Dennard 515, 516, 517 range of environmental camera housings are designed to accommodate a wide range of camera /lens combinations and to provide protection to BS.EN 60529 Level IP 65 (no water ingress).

Clear viewing area, 80 x 60mm. White poweder coat paint finish.

The LTC 9370/00 is an aesthetically designed, small, low profile indoor ceiling housing for CCTV camera installations.  This housing can be easily mounted in fixed or suspended ceilings and is ideal for any application where attractive and discreet CCTV monitoring is required.

The OD-2500A camera housing with heater and blower is designed to be bottom mounted. It is made of aluminium with double-coated baked-on epoxy enamel finish. Heater and blower are pre-installed (24 VAC).

Protects camera/lens combinations up to 317 mm (12.48 in) length.  Hinged side opening for easy installation and camera setup.  Cable routing through base or rear of housing.  Tamper-resistant.  Self-cleaning glass. 

White in colour. Static version.

This attractive domed housing accommodates 1/2-inch and 1/3-inch solid-state cameras for surveillance in a variety of indoor CCTV applications.  The LTC 9348/00 has a 216 mm (8.5 in) lower tinted dome, with an opaque black nonviewing window area and white decorative trim ring.  The above-ceiling portion is manufactured from heavy gauge steel, making it ideal for use in plenum ceiling applications.  These housings can be mounted in both sheetrock and standard drop ceilings.

Camera Housings, External, Wall mount, -20 ~ +50, IP66, Vandal Resistant, with Heater, Sunshield, 128 x 66 x 220 mm, 2,100, 40 mA, 230 V AC

The 129AC Series is well suited to protect CCTV equipment in hot and corrosive environments, where standard aluminium/plastic camera housing would be rapidly damaged by heat and corrosive agents, especially in Industrial indoor installations.The internal part of the camera housing is cooled using a Vortex tube, while the front glass can be cooled via a air nozzle (available as an optional). Two different lengths of the housing are available (360 mm and 460 mm).

Tecnovideo 168IR70 is stainless steel camera housing. It is designed to protect CCTV cameras in industrial, marine and highly corrosive environments. This housing ensures the best protection from external agents and allows an easy installation and maintenance.

The LTC 9305 Series are wall or ceiling mounted detention grade security housings designed for applications such as prisons, parking garages, and hospitals.  These housings are ideal for applications requiring secure CCTV monitoring.  For maximum protection and durability, the light weight cast aluminum design of the LTC 9305 Series housings provide the strength of 10 gauge steel with the superior strength-to-weight ratio of aluminum.  The viewing window is constructed of 9.5 mm (0.37 in) clear polycarbonate material, treated with a scratch resistant coating.  The removable cover provides access to the camera and is secured by a tamper-resistant screw.

Camera Housings, Internal/External, -40 ~ +50, 0 ~ 90, Sunshield, Aluminium, 422 x 174 x 145 mm, 2.3 kg

The Dennard 506 housing is specifically designed to accommodate a range of cameras. The enclosure incorporates a removable top cover for camera access, similar to our Dennard 515 housing.

For maximum protection and durability, the lightweight cast aluminum design of the LTC 9405 Series housings provides the strength of 10 gauge steel with the superior strengthto- weight ratio of aluminum.  The viewing window is constructed of 9.5 mm (0.37 inch) clear polycarbonate material, treated with a scratch-resistant coating.  A removable hinged cover, secured by a key lock, provides easy access to the camera.

The 129AC Series is well suited to protect CCTV equipment in hot and corrosive environments, where standard aluminium/plastic camera housing would be rapidly damaged by heat and corrosive agents, especially in Industrial indoor installations.The internal part of the camera housing is cooled using a Vortex tube, while the front glass can be cooled via a air nozzle (available as an optional). Two different lengths of the housing are available (360 mm and 460 mm).

The DM2010 and DM2015 are designed to provide the installer with a quick, secure and reliable camera option for fixed and zoom cameras.

168LCIRZ70 is a stainless steel camera housing designed to protect CCTV cameras in industrial and highly corrosive environments.

The LTC 9365/00 is an compact ceiling wedge housing.  It can be used with most standard CCTV camera and lens combinations, up to 203mm in length.  Both the housing and the viewing window are made of lightweight polycarbonate and include tamper-resistant screws for increased security. Included in the housing is a fully adjustable camera bracket that allows the camera to be top or bottom mounted.  Additionally, the hinged design and snap fit allow easy installation and servicing.

The DM2010 and DM2015 are designed to provide the installer with a quick, secure and reliable camera option for fixed and zoom cameras. Both housings are designed to operate for either 12VDC to 24VAC or 110VAC to 230VAC.

The DM2010 and DM2015 are designed to provide the installer with a quick, secure and reliable camera option for fixed and zoom cameras.

Units are constructed from pretreated steel sheet, powder coated and stoved. The standard specification includes a heater, two cable glands, adjustable camera platform and stainless steel fixings throughout. Environmental protection is to IP65.

Comes with anti-condensate thermostat. Model CU320 with dimensions 90 x 85 x 320 is available for outdoor zoom lenses cameras.