CCTV Housings  (775)

Tecnovideo 101CIR70 is stainless steel camera housing. It has been designed to protect small and medium size cameras installed in highly aggressive environments such as: Marine, Chemical plants, Food Industry. The compact size and refined design is the ideal solution to protect cameras installed in boats and vessels.

Bosch UHI-OG-0 indoor housing's hinged, side-opening design provides easy installation of all camera/lens combinations, and allows access to most camera and lens controls when the housing is mounted. Route power, video, and lens control cabling through the liquid-tight fittings in the bottom rear of the housing, or for even better cable management, via the feed-through entry holes in the base. Mounting holes in the base permit installation to a wide range of pan/tilts, adjustable heads, and various camera-mounting brackets. For increased security, the unit comes with tamper-resistant screws for the locking clasps to prevent illegitimate access to the housing contents.

Outdoor housing for (230 VAC / 12 VDC) camera with 230 VAC power supply, external BNC and power connectors Protects camera/lens combinations up to 262 mm (10.32 inch) in length Stylish and sturdy housing (IP66; IK10; NEMA 4X) Hinged side opening for easy installation and camera setup Sunshield included Heater and window defroster

Tecnovideo EXPTZIR is a PTZ camera station specifically designed for Hazardous Area applications, especially for every situation where corrosive agents may quickly damage standard aluminum-steel camera stations. It provides full internal cabling through the integrated base junction box and can be controlled via Pelco protocol thanks to the optional integrated RX250DC telemetry receiver.

The UHI-ASBG-0 Housing is smartly styled for indoor use. This housing meets customers’ demands for attractive housings that are both cost competitive and easy to install. They fit a wide range of 1/4 in., 1/3 in., and 1/2 in. format CCD cameras and varifocal lenses.

Outdoor housing for (24 VAC / 12 VDC) camera with 24 VAC power supply and feed-through cabling Protects camera/lens combinations up to 262 mm (10.32 inch) in length Stylish and sturdy housing (IP66; IK10; NEMA 4X) Hinged side opening for easy installation and camera setup Sunshield included Heater and window defroster

Outdoor housing for (230 VAC / 12 VDC) camera with 230 VAC power supply and feed-through cabling Protects camera/lens combinations up to 262 mm (10.32 inch) in length Stylish and sturdy housing (IP66; IK10; NEMA 4X) Hinged side opening for easy installation and camera setup Sunshield included Heater and window defroster

Outdoor housing for (230 VAC / 12 VDC) camera with 230 VAC power supply, blower, external BNC and power connectors  Protects camera/lens combinations up to 262 mm (10.32 inch) in length Stylish and sturdy housing (IP66; IK10; NEMA 4X) Hinged side opening for easy installation and camera setup Sunshield included Heater and window defroster

168WWIR70 is a AISI316L stainless steel camera housings designed to protect CCTV cameras in industrial, marine and highly corrosive environments.

Outdoor housing for (120 VAC / 12 VDC) camera with 120 VAC power supply, blower and feed-through cabling Protects camera/lens combinations up to 262 mm (10.32 inch) in length Stylish and sturdy housing (IP66; IK10; NEMA 4X) Hinged side opening for easy installation and camera setup Sunshield included Heater and window defroster

The 204 series comprises AISI316L stainless steel large camera housings, designed to protect CCTV cameras in industrial, marine and highly corrosive environments.

The 129 series camera housing is constructed entirely from AISI316L stainless steel, for use in industrial and marine environments and in general where corrosive agents can cause a rapid deterioration of a standard aluminium-steel housing.

254SHIR155-L is a stainless steel extra-large camera housings, designed to protect CCTV large optics in industrial, marine and highly corrosive environments.

The 204 series comprises AISI316L stainless steel LARGE camera housings, designed to protect CCTV cameras in industrial, marine and highly corrosive environments.

Tecnovideo 204SHIR110 is a stainless steel LARGE camera housings, designed to protect CCTV cameras in industrial, marine and highly corrosive environments. Its housing has been developed to protect all the possible combinations of big zoom lenses and cameras installed in corrosive environments.

Tecnovideo 254SHIR155 is a stainless steel EXTRA-LARGE camera housings, designed to protect CCTV large optics in industrial, marine and highly corrosive environments. It has a outer body of 254mm (10-inch) diameter and 600mm or 700mm long stainless steel tube. It is the largest AISI316L stainless steel camera housing available on the market. The stainless steel bracket is conceived to reduce vibrations and to keep the housing still in most windy places and for those special applications that require the absence of any vibrations.

The 101 series Stainless Steel Camera housing has been designed to protect small and medium size cameras installed in highly aggressive environments such as: Marine (boats, offshore plants, harbours, coast surveillance, etc.), industrial (machinery control, vision systems, etc.), chemical plants, food industry, and in general every location where a high quality and high reliable product, together with a modern designed and a low aesthetic impact, is requested.

254WWIR155-L is a stainless steel extra large camera housing, designed to protect CCTV large optics in industrial, marine and highly corrosive environments.

Camera Housings, IP67, with Heater, Sunshield, Stainless steel, 300 x 302 x 705 mm, 20 W, 24, 110 ~ 240 V AC

Tecnovideo 129WWIR70 is a stainless steel camera housings designed to protect CCTV cameras in industrial, marine and highly corrosive environments. It has an engineered housing that ensures the best protection from external agents and allows an easy installation and maintenance. It has a highest quality materials and production process that make these housings the best solution to protect cameras installed in the most severe environments.

Camera Housings, IP67, with Heater, Sunshield, Stainless steel, 195 x 206 x 650 mm, 15 W, 24, 110 ~ 240 V AC

The 101 series Stainless Steel Camera housing has been designed to protect small and medium size cameras installed in highly aggressive environments such as: Marine (boats, offshore plants, harbours, coast surveillance, etc.), industrial (machinery control, vision systems, etc.), chemical plants, food industry, and in general every location where a high quality and high reliable product, together with a modern designed and a low aesthetic impact, is requested.

254IR155 is a stainless steel extra large camera housing, designed to protect CCTV large optics in industrial, marine and highly corrosive environments.

Tecnovideo 129WWIR is a stainless steel camera housings designed to protect CCTV cameras in industrial, marine and highly corrosive environments. It has a engineered housing that ensure the best protection from external agents, which allow an easy installation and maintenance. It has a highest quality materials and production process, that make these housings the best solution to protect cameras installed in the most severe environments.

The 254 series is an outstanding product in CCTV accessories market. This is the largest AISI316L stainless steel camera housing in Tecnovideo's product range.     Its outer diameter is 254 mm (10 inches) and it is available in two lengths: 600 and 700 mm. It's the perfect solution for hostile ambient conditions, such as: marine (boats, offshore plants, coast surveillance), industrial (machinery control, vision systems), chemical plants, paper industry, food industry and, in general, every location where corrosive agents may damage the lenses and the cameras. The 254 series has been developed to fit the biggest CCTV zoom lenses (such as Raymax "CATS 2000," Myutron PH33X16HS-RGE, Fujinon C22 and D60 series, Pentax H20ZAME and H55ZAME series, Kowa LMZ1000AM) offering the best protection in aggressive environments, being manufactured using high quality marine grade stainless steel camera housing. Thermostatically controlled heater/demister, sunshield, integrated washer/wiper system are available as optionals, while an extensive range of washer tanks with integral pump and mounting accessories are available as accessories. The 254 series is available both for visible light cameras and for IR thermal imaging cameras, with a special IR Germanium window with anti-reflection (AR) and diamond like (DLC) coating, for 7.5 - 14 μm IR range. Upon request are available CaF2 (Calcium Fluoride) and Sapphire special windows for MWIR (mid-wavelength infrared) range (3 - 5 μm). 

Tecnovideo 204WW140 is a stainless steel camera housing designed for cameras and similar devices, which size is really big and need to be placed in industrial, marine and highly corrosive environments. It has a housing diameter of 204 mm, which is among the biggest sizes available on the market, perfect for all the bigzoom lenses and related cameras.

Tecnovideo 168WWIR110 is a camera housings made in stainless steel to completely guarantee an absolute protection from aggressive external agents. It has a housing that is built in AISI316L stainless steel and has a modern and refined look.

The 204 series comprises AISI316L stainless steel LARGE camera housings, designed to protect CCTV cameras in industrial, marine and highly corrosive environments.

The 204 series comprises AISI316L stainless steel LARGE camera housings, designed to protect CCTV cameras in industrial, marine and highly corrosive environments.

The 204 series comprises AISI316L stainless steel LARGE camera housings, designed to protect CCTV cameras in industrial, marine and highly corrosive environments.

rotable housing, replaces 2' x 2' ceiling tile, clear window, max cam/length 11"

Camera housing CHOB large side opening.

RC200 mount to replace 60x60 UK std tile

Wedge housing, c/w camera bracket, clear window, ABS, MCL 8.5"

Cylindrical. Square as model CHDS.

high impact ABS, tinted window, tamper proof

Includes: miniature wedge housing, for PCB cameras, clear window.

tinted micro dome, MCL = 11"

multiple camera dome, 10" dia, accepts up to 4 pcb camera, indoor 12" dome.

quarter dome, tinted dome, (1 f stop) c/w camera bracket, max cam/lens length 8".