Analog Transmission Systems  (629)

The X-class MPEG4/M-JPEG variable bit rate video codec incorporates the latest compression techniques to ensure analogue equivalent video quality for all video applications wehre real-time low latency video transmission within an IP network is required. In addition to the video transmission engine, the codec provides two auxiliary data transmission channels; 1 audio channel and 3 contract input/outputs. It is offered as a Eurocard with chassis or as a stand-alone boxed unit.

OT Systems ET8181-S is an industrial rack-mount 8-channel 10/100Base-TX to 100Base-FX SFP Ethernet media converter. The RJ45 port supports 10/100Mbps-Full/Half-duplex, Auto-negotiation, and Auto MDI/MDIX. It supports external 100Base SFP.

1 watt radiated power.  3dB Omnidirectional rubber duck antenna.  Female RCA audio connector @ 600 Ohms, 1Vp-p.  Includes 12VDC power supply and universal wall / pole mount.

4 channels, 4 ~10 alarms, Pre & Post Alarm Image Buffer, JPEG, RJ-45, 10Base-T/100Base-TX, UDP/IP, TCP/IP, HTTP, FTP, DHCP, IGMP, ARP, 30 fps, PAL/NTSC, 1100, 44 x 185 x 189, 3 A, 5 V DC, 0 ~ 40

The VideoJet 8000 delivers the highest quality real-time video vailable today.  Its advanced hardware engine produces 30 mages per second of pure MPEG-2 DVD-quality video.  Each channel generates fully interlaced nonmultiplexed video at 30 IPS.  The VideoJet 8000's 120, 240, or 600 GB internal hard disk records weeks at a time locally, or for more extended recording periods it can use the VIDOS-NVR network video recorder.  Such an NVR server has one or two RAID5 disk arrays attached for maximum fault tolerance and a storage capacity of over 12 TB.

1 watt radiated power.  3dB Omnidirectional rubber duck antenna.  Female RCA audio connector @ 600 Ohms, 1Vp-p.  Includes 12VDC power supply and mounting brackets.

12 dB High Gain Directional 6 Element Antenna. For portable and temporary, vehicle or mobile equipment mounted applications. Durable aluminium all-weather construction. Wind load rating - 100mph. Includes 6 feet LMR-206 dual shielded low loss cable and connectors.

200mW radiated power.  BNC female stereo audio (600Ohms, 1Vp-p).  3dB omnidirectional rubber duck knuckle transmitter antenna.  Antenna connector SMA female.  Includes 12VDC power supply.  Includes mounting brackets.

Network Video Technologies (NVT) has just released its NV-442, the new compact, cost-effective 4-channel StubEQ™ Active Receiver Hub for real-time Video over UTP wire. A development evolution of the award-winning and widely accepted DigitalEQ™, this new 4-channel hub receives UTP video at distances up to 1,500 feet (460 m), or 2,000 feet (600m) when used with the NV-653T active transmitter.Continuous processor-controlled, image-independent, 2-band equalisation ensures crisp clear video without cumbersome and installation-time consuming manual adjustments. This small 4-channel hub is housed in an ultra-compact 1U x 2" deep enclosure that supports RJ45 or screw-terminal connectivity.With ground-loop immunity and multi-stage transient protection, this product affords installers and end-users the benefit of exceptional video performance, substantial cost savings, simplicity, and the use of standards-based, future-proof structured building wiring. As with all NVT products, the NV-442 is UL and cUL listed, are compliant with CE, RoHS, and WEEE, and are covered by NVT's no-nonsense lifetime warranty.

14dB High Gain Directional Patch antenna. For indoor/outdoor equipment mounted applications. Includes 6 feet LMR-195 dual shielded low loss cable and connectors.

23dB High Gain Mesh Directional Parabolic Dish Antenna. For long range outdoor equipment mounted applications. Includes 6 feet LMR-206 dual shielded low loss cable and connectors. Rotate for vertical or horizontal antenna polarization.

8 dB High Gain Directional Patch Antenna. For portable and temporary, vehicle or mobile equipment mounted applications. Includes 6 feet LMR-206 dual shielded low loss cable and connectors.

14dB High Gain Directional Patch antenna. For indoor/outdoor equipment mounted applications. Includes 6 feet LMR-206 dual shielded low loss cable and connectors. Rotate for vertical or horizontal antenna polarization.

30dB Pre-Amplified Antenna. 'plug & play' design. For permanent or temporary long range application. Bandpass filter reduces outside interference and noise. 90mA current consumption.

5dB Magnetic Mount Omni-Directional Portable Whip Antenna. For portable and temporary, vehicle or mobile equipment mounted applications. Heavy duty 3" magnet - 54lbs pull strength. Twin enclosed coil reducing wind noise. Includes 6 feet RG-58A/UD dual shielded low loss cable and connectors.

15 dB High Gain Directional 6 Element Antenna. For portable and temporary, vehicle or mobile equipment mounted applications. Durable aluminium all-weather construction. Wind load rating - 100mph. Includes 6 feet LMR-206 dual shielded low loss cable and connectors.

The Outdoor WiMAX CPE is based on the innovational IEEE 802.16d-2004 technology. It is the newest wireless product for outdoor applications.It benefits from WiMAX technology, delivering the best economics and advanced wireless solution for fixed broadband access. Operating at 3.5GHz with Orthagonal Frequency Division Multiplexing (OFDM) and non-line-of-sight (NLOS) technology helps to overcome common urban obstacles. The Outdoor WiMAX CPE is Integrated with 802.3af Power over Ethernet (POE) support, making it easy and fast to install.  It has a built-in antenna and waterproof design for outdoor applications.

User selectable frequency.  RCA female audio connection @ 600 Ohms, 1Vp-p.  Power supply included. FCC / IC approved.  Omnidirectional rubber duck antenna.  TNC female antenna connector.  Microprocessor controlled PLL frequency stability.

The LTC 4681 and LTC 4682 Series are IEEE 802.3- compliant transceivers designed especially for the transmission of 10/100BaseT Ethernet signals.  Having no user adjustments, a quick and easy installation is guaranteed.  The modules are designed to automatically detect MDI/MDI-X type cable connections, and are compatible with both 10 Mb/s and 100 Mb/s speeds.  LED status indicators that provide a clear indication of operating parameters, and data connections are made to standard RJ-45 connectors.

Radiowave transmission, TX/RX, Colour / Monochrome, 666, PAL, NTSC, 900, 17.8 x 17.8 x 11.4, T - 230mA; R - 330mA, 9 ~ 14 V DC, -40 ~ +77, IP67

The V400 Amplifier Mainframe provides the housing, signal and data interconnection, monitoring electronics, and power supplies for the ASL range of power amplifier modules and their interface cards.

The COE X-Net DataMux, allows up to 12 data channels to be multiplexed into one stream. The DataMux can be used as a standalone muliplexer or in conjunction with COE X-Net OPT4 or OPT8 modules to provide additional data channels.

Provides media conversion from copper to fibre and vice versa coupled with long distance transmission over a single fibre optic cable. Ideal for applications that require Fast Ethernet over fibre such as ANPR, IP Codecs, IP Cameras, Megapixel Cameras, Wireless LAN and IP Intercom etc. 

DSP-based audio router allows routing of 20 audio inputs. Built in fire alarm interface. Includes digital storage for 4 x 32-second and 4 x 16-second DVA messages. 

The NVT Model NV-215J-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or colour video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

Modular storage device for VisioWave Evolution and Power Plus Digital Video Equipments. Up to eight EIDE hard disks. Keylock hot-swappable mobile rack with LEDs to indicate HDD status. Support Raid 0,1,3,5 and 0+1.

OT Systems ET1111PpH-S-DR is a hardened 100Base-TX (PoE+) to 100Base-FX SFP Ethernet media converter. It supports IEEE802.3at PoE+(30W), Full/Half duplex, Auto MDI/MDI-X as well as external 100Base SFP. It features LED indicators for network diagnostics.

Plugs directly into CardBus Type-II slot. Intuitive client utility for easy, fast configuration. Transmitter power control for optimal performance. Connector for external range extender antenna. ROHS compliant.

Available with an integrated 16dBi dual polarized antenna. Comes with a 2x2 MIMO high power radio capable of 24dBm transmit power. Entry-level 50Mbps version for applications like T1/E1 line backhaul. Carrier grade advanced security with AES-2561 bit encryption and built-in feature-rich network protocols for bridging, routing and gateway functionality. Supports large ethernet frame up to 2048 bytes for backhauling MPLS traffic in carrier class deployments. All-in-one CPE with security & gateway features.

Available with integrated antenna. 100Mbps of throughput performance with maximum data rates up to 300Mbps. Carrier grade advanced security with AES-128 bit encryption and built-in feature-rich network protocols for bridging, routing and gateway functionality. All-in-One CPE with security & gateway features.

WiMAX QoS provides reliable connectivity for public safety applications. Mobile roaming enables application persistence. Adaptive wireless network optimises performance. Designed for fast installation and lower maintenance cost.

WiMAX QoS provides reliable connectivity for public safety applications. Mobile roaming enables application persistence. Adaptive wireless network optimises performance. Designed for fast installation and lower maintenance cost.

Consisting of an all-outdoor, single sector base station and multiple subscriber configurations (integrated antenna or N-Connector for external antenna), the Tsunami MP.16 series offers the most scalable, best value WiMAX system for the 3.3 GHz frequency band. Like all Proxim products, the MP.16 3300 continues to offer a comprehensive feature set to future-proof wireless networks.

Non-line-of-sight and advanced features. Widest range of frequencies. Carrier-grade security. Cost effective and ease of use for quick return on investment.

Supports RS-232, RS-449, V.35, FXO/FXS Voice Channel, and T1/E1 Interfaces with Synchronous Data Speeds up to 2.048Mbps. The modem Transmits up to 40Km with Local and Remote Loop-back Test. There are 7 Status indicators and Optional Redundant Optics. operates in both simplex and full duplex modes. Capable of synchronous and asynchronous operation.

1 Video Input, 4 Video Outputs Video Signal: FHDA/TVI, AHD, CVI and Standard Analogue Operating Conditions: -25°C ~ + 70°C

Experience superior performance with unparalleled flexibility of up to 1 Mhz channel spacing with our Tsunami® MP-8200 wireless series.   Paving a new path in the wireless industry, Proxim addresses the requirement for a versatile and a high performance wireless solution, with the Tsunami® 8200 series. The Tsunami® MP-8200 delivers data rates of 300 Mbps along with excellent spectrum flexibility of upto 1MHz channel spacing and high power radios capable of 27 dBm Tx power for extend coverage.   The Tsunami® MP-8200 features nLoS functionality and leverages the advantages of OFDM, MIMO radio innovations and Proxim’s proprietary Wireless Outdoor Routing Protocol (WORP) to provide in excess of 4G speeds with QoS class of service for delivering voice, video and data applications.   With supreme throughput, high power radio, flexible channel features and  dual Gigabit Ethernet ports with PoE out, for powering additional devices, the Tsunami® MP-8200 series is an ideal solution for service providers and government organisations with requirements of all kinds, from last mile broadband wireless access (BWA) to wireless video surveillance and more.

The SilverNet MESH system uses an advanced algorithm to enhance the throughput and reduce time-outs from the centre to the edge of the network. The system can also simultaneously support wireless hotspot coverage. It provides wireless broadcast access and high bandwidth for applications such as -audio/data/video, services for the municipal administration, public security etc.

Standards & protocols: H.261, H323, M-JPEG, TCP, UDP, IP, ARP, ICMP, FTP, DHCP, HTTP, G.711, G.728. Video resolution: 704 x 576 pixels (HiRes), 352 x 288 pixels (CIF), 176 X 144 pixels (QCIF). Approvals: EMC: CE, EN 55103-1: 1996, EN55103-2:1996.

The wireless point to multipoint system delivers 300Mbp bandwidth and up to 1Mhz channel spacing. Dual Ethernet ports with PoE out for powering additional devices. 90° sector antenna. Wireless Outdoor Router Protocol (WORP).