Analog Transmission Systems (757)
CamDisc HNVR processes IP cameras and provides a Megapixel solution for Central Monitoring Stations.HeiTel is expanding its range of digital recorders with the new CamDisc HNVR - a hybrid network recorder and transmitter for the mixed operation of up to 10 analogue and IP cameras. The specifications of the CamDisc HNVR are similar to those of the reliable CamDisc SVR, however the new system offers considerably higher performance for processing large video data streams from IP cameras. CamDisc HNVR is of course fully compatible with all existing HeiTel receiver equipment. Which means that IP or megapixel cameras (from virtually any manufacturer) can now be connected to local or remote video monitoring stations and emergency and service monitoring stations fitted with HeiTel receiver equipment.Ex-works the CamDisc HNVR is a network recorder and transmitter for IP cameras with standard and megapixel resolutions. If analogue camera signals need to be processed as well up to two ‘Hybrid Card 4' cards each with four connections can be added. With the ‘Hybrid Card 4', HeiTel is opting for a modular and therefore cost-optimised hardware design. Recordings are made onto an integrated removable hard disk. Key IP camera functions (including PTZ control functions) can be controlled over the network via the HeiTel standard system interface.Thanks to physically and functionally decoupled network connections, megapixel cameras can now be integrated in existing networks without occupying too many resources or impacting on the network's intended operating function.The CamDisc HNVR is flexible in terms of power supply: with a nominal input voltage of 12 V DC, a further input voltage range of 8 to 16 V DC is supported. This makes the CamDisc HNVR ideally suited for integration in battery-assisted emergency power supplies.HTcompress®, HeiTel's own compression process, minimises network load, something which must always be considered when using megapixel IP cameras.Another HeiTel process, HTconnect® allows the CamDisc HNVR and all HeiTel systems totally secure access to firewall-protected HeiTel video systems in private networks.
Add to Compare
Experience the new era of digital wireless transmission with VTQ! The O.R.C.A uses state-of-the-art standards and technologies like MPEG-2 compression and COFDM digital modulation. A high picture quality without video noise or picture dropouts is maintained all the time, even when there is no line of sight.Key features are: MPEG2 compression Different transmission modes (QPSK, 16QAM, 64QAM) Easy adjustment of all important parameters like Guard Intervall and Forward Error Correction Picture in DVD quality 2.4 GHz and 5.8 GHz in ONE unit Customized equipment with your requirements is available on request.
Add to Compare
HeiTel seemed to have hit the spot with their new product line since the booth at the Security show was packed with visitors throughout. Apart from the long wished for 10-channel CamDisc svr, HeiTel achieved to present thought out software and hardware solutions, ranging from single operator applications, multi operator system solutions through to full integration of video transmission into alarm centres.The presentation of the new products centred around the product families CamTel svr and CamDisc svr (svr: server), both available with four and ten video inputs and triplex functionality. Additionally HeiTel showed their new network based receiving software developed especially with monitoring centres in mind.Of particular interest is the unique MultiLink technology employed by the new range of transmitters. MultiLink enables the simultaneous transmission of video and audio over differing transmission mediums for example a TCP/IP and an ISDN connection can take place at the same time and can connect to various high and low bandwidth connections i.e. LAN, ADSL/Cable (Internet), PSTN, ISDN, GSM (HSCSD).HeiTel also offers various software solutions with its new CamControl family. Starting with a single PC station version, moving up to the MultiSite version (multiple connections on one PC), right through to made to measure multiple PC (MultiUser) network solutions. Monitoring centre managers can choose from a dedicated video management systems for multiple users with central database management, or a solution fully integrated into the 3rd party monitoring station alarm management software.HeiTel will begin introducing the products gradually in January 2005. Starting with CamDisc svr 10, HeiTel guarantees its customers long-term investment protection for every purchase, as all devices are backwards compatible, can be expanded with additional modules and operate on firmware that can be updated via remote connection without additional costs.
Add to Compare
Lift Master Kit for transmitting CCTV pictures from a lift car to the security TV monitor. Works in buildings up to 100 floors high. Kit comprises 12V plug top power supplies x2, video modulator (1210), video demodulator (1215), laser transmitter (1220) and laser receiver (1225). Features optional sound monitoring, optional discreet or covert camera, optional covert microphone.
Add to Compare
Illustra IBPN-M-IS12-A Pro Gen4 Multisensor Pendant Cap
Illustra IA-POE-90-U00 90w PoE Injector
Illustra IA-CBL-IO-F30 I/O cable
