Analog Transmission Systems  (757)

The ComNet CNFE2DOE2 allows any combination of two RS-232, RS-422, or 2 or 4-wire RS-485 serial data circuits to be inserted onto any 10/100 Mbps Ethernet-based network.

Send an IP Video Signal over Existing Coaxial Cable. Passive System – No Power Required. Exceeds the IEE802.3 10BaseT NEXT (Near End Crosstalk) Specification, Isolates the Receiver from the Transmitted Signal. Transmission up to 100 Metres (Max). Two Pieces per Kit.

ComNet FVT/FVR2001(M)(S)1 multiplexer simultaneously transmits two channels of video over one optical fiber utilising state-of-the-art 10-bit digital encoding and decoding for high-quality video transmission that meets the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. The unit is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems.

NiceVision NVSAT launched the concept of the Smart Video Server, created especially for distributed organisations.  It takes video from 2 to 8 cameras and encodes them for transmission across an IP network, making it ideal for outlying sites and clusters of cameras across large campuses.  NiceVision NVSAT makes CCTV monitoring smarter because it can be loaded with NiceVision video analysis applications, to make efficient use of network resources in response to detected threats.  The NiceVision NVSAT: transmits up to 8 channels of real-time, 4CIF video across IP networks combines codec, recording and video analysis in one compact unit automatically adapts resolution, frame-rate and bit-rate to detected security threatsNiceVision Alto offers proven video analysis and recording quality in a flexible, easy to configure package, and introduces complete level-of-service flexibility to the DVR market.  It allows users to optimize use of valuable video networking, processing and storage resources by automatically adjusting resolution, frame rate and picture quality according to schedules or in response to detected events.  Key features:stand-alone or fully networked DVR, 16 – 32 channels, 1TB integrated RAID full level-of-service control of resolution, frame-rate and bit-rate proven video analysis applications, MPEG4 main profile recording and networking

Outdoor wireless access point, bridge and repeater.  Resolves hidden node and quality of service issues.  Automated configuration, health monitoring and diagnostics with Nextiva.

ComNet FVT/FVR401(M)(S)1 multiplexer simultaneously transmits four channels of video over one optical fiber utilising state-of-the-art 10-bit digital encoding and decoding for high-quality video transmission that meets the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. The unit is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems.

Rack Card transmitter for control site transmits high quality, simultaneous video and bi-directional Sensornet data on one multimode optical fiber.

Single receive module receiver multiplexes up to 8 channels of TTL and/or dry contact closure on one multimode optical fiber. A set of 8 LEDs on the transmitter and the receiver units indicated the channels in use.

The BreezeMAX Base Station consists of two units Indoor Unit (IDU) and Outdoor Access Unit (ODU). The IDU is the main chassis of the BreezeMAX base station, which establishes wireless network connections and manages bandwidth in compliance with the IEEE 802.16e-2005 wireless standard. The IDU is designed for diversity, provides high throughput and is built according to the Software Defined Radio (SDR) approach.The IDU is comprised of two main units in addition to power and management components Access Unit (AU) and Network Processing Unit (NPU). A high-power remote radio unit that connects to an external antenna, the ODU provides high system gain and interference robustness utilising high ransmit power and low noise figure.

Video Modem System, Transmits 1 x Composite Video Signal, 1 x Alarm Signal, 1 x Audio Signal,1 x RS485 Telemetry Signal and 12V DC Power (Max. Output 1A) Over a Single Coaxial Cable.Kit Includes 1 x Sender Unit, 1 x Receiver Unit and a PSU.

ComNet FVT/FVR414(M)(S)1 is a video transmitter/data transceiver and video receiver/data transceiver series that utilise digital encoding and decoding for high-quality video transmission. It provides transmission of four independent video channels and four bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. It is universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS-232, RS-422 and 2 or 4-wire RS-485 with tri-state support. It has a plug-and-play design that ensures ease of installation and no electrical or optical adjustments are ever required. Its bi-colour (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. It is interchangeable between stand-alone or card mount configurations.

Rackmount housing or standalone.

ComNet FVT/FVR8012(M,S)1 10-bit digitally encoded video transmission transmits eight channels of video utilizing state of the art 10-bit digital encoding and decoding for very high quality video transmission, along with two channels of bi-directional data and one bi-directional contact closure over one single mode or multimode optical fiber. This equipment is environmentally hardened and suitable for use in unconditioned roadside or out-of plant installations. The unit is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and 485 (2 & 4 Wire) data.

Module transmitter for video source transmits high quality, simultaneous video and bi-directional Sensornet data on one multimode optical fiber.

Video Distributor for HD analogue signals 1 signal input to 4 signal outputs Supported formats HD-TVI, AHD, HDCVI, CVBS High resolutions of up to 4K are supported

ComNet FVT/FVR8018(M)(S)1 10-bit digitally encoded video transmission transmits eight channels of 10-Bit Digital Video along with eight channels of bi-directional data over one single mode or multimode optical fiber. The video quality exceeds RS-250C for short-haul video transmission. This equipment is environmentally hardened and suitable for use in unconditioned roadside or out-of plant installations. The unit is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and RS485 (2 & 4 Wire) data.

Two fiber module multimode with ST connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

Module receiver for control site receives high quality, simultaneous video and bi-directional Sensornet data on one multimode optical fiber.

Rack Card receiver for control site receives high quality, simultaneous video and bi-directional Sensornet data on one multimode optical fiber.

ComNet FVT/FVR120D8(M)(S)1 10 bit digitally encoded video transmission transmits 12 real-time / full frame colour video signals and 8 bi-directional data signal over one optical fibre. The unit exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. FVT/FVR120D8(M)(S)1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.

Module receiver for control site receives high quality, simultaneous video and bi-directional Sensornet data on one multimode optical fiber.

Rack Card transmitter for control site transmits high quality, simultaneous video and bi-directional Sensornet data on one multimode optical fiber.

ComNet FVT320D8S1 video transmitter / data transceiver utilises 10-bit digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit provides transmission of 32 independent video channels and eight bi-directional data channels over one optical fibre and is ideal for use in unconditioned roadside or out-of-plant installations. FVT320D8S1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.

One fiber module multimode with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

Module transmitter for video source transmits high quality, simultaneous video and bi-directional Sensornet data on one multimode optical fiber.

Rack Card receiver for control site receives high quality, simultaneous video and bi-directional Sensornet data on one multimode optical fiber.

ComNet FVT/FVR160D8S1 10 bit digitally encoded video transmission transmits 16 real-time / full frame colour video signals and 8 bi-directional data signal over one optical fibre. The unit exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. FVT/FVR160D8S1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.

Rack Card video transmitter transmits one channel of high quality video on one multimode optical fiber. Designed to be completely tranparent to all camera and monitor manufacturers. I/O level is 1Vpp. 850nm Optical wavelength.

Rack Card Dual video transmitter transmits two channels of high quality video on two multimode optical fibers. Designed to be completely tranparent to all camera and monitor manufacturers. I/O level is 1Vpp. 850nm Optical wavelength.

One fiber module multimode with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

Two fiber module multimode with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

ComNet FVT/FVR8014(M)(S)1 10-bit digitally encoded video transmission transmits eight channels of 10-Bit Digital Video along with four channels of bi-directional data over one single mode or multimode optical fiber. The video quality exceeds RS-250C for medium-haul video transmission. This equipment is environmentally hardened and suitable for use in unconditioned roadside or out-of plant installations. The unit is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and RS485 (2 & 4 Wire) data.

ComNet FVT/FVR240D8S1 10 bit digitally encoded video transmission transmits 24 real-time / full frame colour video signals and 8 bi-directional data signal over one optical fibre. The unit exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. FVT/FVR240D8S1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.

ComNet FVT/FVR280D8S1 10 bit digitally encoded video transmission transmits 28 real-time / full frame colour video signals and 8 bi-directional data signal over one optical fibre. The unit exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. FVT/FVR280D8S1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.

Two fiber module Rack card with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

One fiber Rack Card multimode with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

ComNet FVR40C4M4 4 channel video/contact receiver supports transmission of four independent short-haul quality 10-bit digital video signals and four contact closures in the direction of the video over multimode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly confirming operating status. The unit may be either wall or rack-mounted.

The ComNet CopperLine CLFE(X)UTP Ethernet over UTP line consists of four models that support 100Mbps Ethernet as well as Pass-through Power over Ethernet (PoE) over twisted pair cable (CAT5, UTP).

ComNet CNFE2MC2C ethernet media converter transmits and receives 10/100 Mbps data and two bi-directional contact closures over multimode or single mode optical fibre using SFP modules to select distance and connector type. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. The CNFE2MC2C media converters is environmentally hardened to operate in extreme temperatures.

Two fiber Rack card multimode with ST connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.