Analog Transmission Systems  (757)

ComNet CNFE2MC2C ethernet media converter transmits and receives 10/100 Mbps data and two bi-directional contact closures over multimode or single mode optical fibre using SFP modules to select distance and connector type. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. The CNFE2MC2C media converters is environmentally hardened to operate in extreme temperatures.

One fiber Module Singlemode with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

One fiber Rack Card Singlemode with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

ComNet FVT200D8S1 video transmitter/data transceiver transmits 20 real-time / full frame colour video signals and 8 bi-directional data signal over one optical fibre. The unit exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. FVT200D8S1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.

Reliable, secure communications in the 4.9 GHz band. Capable of being deployed in both point-to-point and point-to-multipoint configurations, and able to co-exist with other systems in mixed spectrum architectures, the ultra-flexibility of the 4900 enables each network to be tailored in its configuration to efficiently handle a multitude of applications.Provides secure and reliable connectivity in any terrain, environment and climate, the BreezeACCESS 4900 is well suited for voice, video and data applications in combining FIPS-197 government approved (AES-based) encryption, advanced quality of service (QoS) and high throughput speeds.

One fiber Module Singlemode with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

One fiber Rack Card Singlemode with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

The VDS 2200 series offers a range of low-cost fibre optic video-data transceivers. Built-in AGC allows for plug and play installation and maintenance-free operation.  The VDS transmitters come in stand-alone housings; the receivers are rack-mountable or stand-alone models. The VDS system is available in single as well as dual multimode versions and also as a dual single-mode system.  Its bi-directional data interface makes the VDS compatible with all types of cameras (RS-485, TTY, Manchester, biphase, etc).

The ComNet™ FVT/FVR1031 series video transmitter/ receiver and data transceiver supports simultaneous transmission of short-haul quality 10-bit digitally encoded video or bi-directional data over one multimode or single mode optical fibre. The module is universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces and most major data protocols.

EVT-250 Transmitter unit, Euroboard size for installation in the Ernitec RVU 200 Rack Frame.  EVR-250 Receiver unit, Euroboard size for installation in the Ernitec RVU 200 Rack Frame.

ComNet FDC10M1(A) contact closure transceiver provides bi-directional transmission of contact closure over one multimode optical fiber. The bi-directional contact closure module has two relay outputs and one relay input. One relay output follows the “relay input” at the remote end. When the remote “relay input” is shorted, the local relay output is closed and vice-versa. The second relay output is closed when “carrier” is detected from the remote end, this indicates that the optical fiber is connected and that the remote end has power and is operating.

ComNet FVT1001S1 video transmitter supports transmission of short-haul quality 10-bit digital video over one single mode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

UTP / CAT 5 transmission, 16 channels, TX/RX, 228, PAL / NTSC, DC ~ 10, 60, 788 , 42 x 457 x 503, -10 ~ +70, 0 ~ 95

ComNet FVT812M1 video transmitter/data transceiver transmits eight channels of video utilising state-of-the-art digital encoding for high-quality video transmission, along with two channels of bi-directional data and one bi-directional contact closure over one multimode optical fibre. The FVT812M1 is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and 485 (2 & 4 Wire) data. Bi-Color LED indicators are provided to indicate the status of the system, video and data.

Genie’s “Smart Cabling” Active Baluns are designed for use with Category 5e Unshielded Twisted Pair (UTP) cable. Each Transmitter and Receiver is supplied with a DC12V Power supply as standard and can transmit and receive full motion composite video signals up to 900 metres in Colour and 1800 metres in Monochrome.

UTP / CAT 5 transmission, 4 channels, TX/RX, 228, PAL / NTSC, DC ~ 10, 60, 228 , 42 x 126 x 45, -10 ~ +70, 0 ~ 95

The ComNet™ Ethernet media converters are designed to transmit and receive 10/100 Mbps data over multimode or single mode optical fiber.

ComNet FVR10C1M1 1 channel video/contact receiver supports transmission of one independent short-haul quality 10-bit digital video signals and one contact closures in the direction of the video over multimode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly confirming operating status. The unit may be either wall or rack-mounted.

ComNet FVR20C2S2 dual channel video/contact receiver supports transmission of two independent short-haul quality 10-bit digital video signals and two contact closures in the direction of the video over single mode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly confirming operating status. The unit may be either wall or rack-mounted.

ComNet FVTRM1B video receiver supports transmission of short-haul quality 10-bit digital bi-directional video or sync over one multimode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. The unit is interchangeable between stand-alone or card mount configurations.

ComNet FVTRS1A video transmitter supports transmission of short-haul quality 10-bit digital bi-directional video or sync over one single mode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. The unit is interchangeable between stand-alone or card mount configurations.

ComNet FVT812S1 video transmitter/data transceiver transmits eight channels of video utilising state-of-the-art digital encoding for high-quality video transmission, along with two channels of bi-directional data and one bi-directional contact closure over one single mode optical fibre. The FVT812M1 is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and 485 (2 & 4 Wire) data. Bi-Color LED indicators are provided to indicate the status of the system, video and data.

ComNet FVT412M1 video transmitter/data transceiver transmits four channels of video utilising state-of-the-art digital encoding for high-quality video transmission, along with two channels of bi-directional data over one multimode optical fibre. The FVT412M1 is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and 485 (2 & 4 Wire) data. Bi-Color LED indicators are provided to indicate the status of the system, video and data.

ComNet FVT/FVR1014(M)(S)1 is a video transmitter/data transceiver and video receiver/data transceiver series that utilise 10-bit digital encoding and decoding for high-quality video transmission. It meets the requirements of EIA RS-250C for short-haul video transmission. It provides transmission of one independent video channel and four bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. It is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485 with tri-state support. It has a plug-and-play design that ensures ease of installation and no electrical or optical adjustments are ever required. Its bi-colour (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. it is interchangeable between stand-alone or card mount configurations.

ComNet FVT1001M1 video transmitter supports transmission of short-haul quality 10-bit digital video over one multimode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

ComNet FVTRM1A video transmitter supports transmission of short-haul quality 10-bit digital bi-directional video or sync over one multimode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. The unit is interchangeable between stand-alone or card mount configurations.

Preferably unshielded twisted-pair cables should beused for the signal transmission.

ComNet FVT/FVR320D8S1 video transmitter/receiver and data transceiver utilises 10-bit digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for short-haul video transmission. The unit provides transmission of 32 independent video channels and eight bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. The unit is universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.

ComNet FVT41M1 video transmitter transmits four channels of video over one optical fibre utilising state-of-the-art digital encoding and decoding for high-quality video transmission. The unit is ideal for use in unconditioned roadside or out-of-plant installations. The unit is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

UTP / CAT 5 transmission, 16 channels, TX/RX, Telemetry Control, 228 , PAL / NTSC, DC ~ 10, 60 , 795 , 457 x 42 x 45, 28 V AC, -10 ~ +50, 0 ~ 95

Alvarion BreezeMAX PRO is an CPE developed to use the new Intel PRO/Wireless 5116 broadband interface WiMAX chip and WiFi interface. BreezeMAX is Alvarion's WiMAX platform that uses OFDM technology for advanced Non-Line-of-Sight (NLOS) functionality and is designed for operators to offer broadband IP-based data and voice services. Its carrier-class design supports broadband speeds and quality of service (QoS) for voice and multimedia applications enabling operators to offer multiple services to thousands of subscribers with a single base station. The BreezeMAX Pro has been built to the specifications of IEEE 802.16-2004 for seamless integration into existing BreezeMAX networks. Radio access method: TDMA FDD. Central frequency resolution: 125KHz. Data Communication: IEEE 802.3 CSMA/CD. Air interface Communication: IEEE 802.16-2004. VLAN support: IEEE 802.1Q. Traffic classification: Layer 2 IEEE 802.1p, IP DiffServ Code Points DCSP.

Converter HD-TVI, AHD, CVI, CVBS to HDMI, VGA, CVBS Display simultaneously HDMI, VGA and CVBS signal HD-TVI, AHD, CVI input: 720p@25/30/50/60Hz, 1080p@25/30Hz HDMI, VGA output: 480p, 576p,720p, 1080i,1080p CVBS output: PAL/NTSC Power LED, Link LED Built in OSD to display input/output setting PIP display under dual camera input mode

ComNet FVT1S1/M mini video transmitter transmits one channel of video over one optical fiber. FVT1S1/M transmitter supports single-mode fibre. It is compatible with the FVR10C1(M,S)1, FVR20C2(M,S)2 and FVR40C4(M,S)4 series of receivers. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. The unit has a small footprint and is ideal for mounting where space is limited or can be mounted inside equipment housing.

The ComNet CopperLine CLFE(X)COAX Ethernet over COAX line consists of four models that supports100Mbps Ethernet as well as Pass-through Power over Ethernet (PoE) over standard 75Ω coaxial cable.

The NEW BreezeMAX Extreme all-outdoor 802.16e WiMAX base station simplifies your network architecture and maximizes your ROI with its compact, all-in-one design. Integrated base station, antenna, ASN Gateway and GPS receiver enable "zero-footprint" deployment while offering a lower total cost of ownership. Locate your BreezeMAX Extreme on communication towers, rooftops and street poles.Advanced features include MIMO, HARQ and QoS for superior capacity, range and performance.Choose 3.65, 4.9, 5.3, 5.4 or 5.8 GHz to quickly and easily expand your network and increase subscribers.Learn more in the BreezeMAX Extreme Information Kit, packed with detailed features, benefits and advantages for you and your customers. Includes the NEW WiMAX 802.16e Advantage white paper. Discover how the 16e standard protects and prepares you for future technology evolution vs. 802.16d-based systems. Click here

ComNet FVT20 is a dual video transmitter that supports two independent AM video signals in one module on two independent multimode fiber optic cables. The module is not a multiplexer. It is ideal for CCTV installations and can be used to double the fixed video capacity of the C1 rack for up to 28 independent video channels per card cage. It is compatible with the FVR11M, FVR10M, FVR21, and FVR22 receivers. It has a plug-and-play design that ensures ease of installation requiring no electrical or optical adjustments. The transmitter incorporates a bi-colour (Red/Green) indicating LED for monitoring proper system operation. It is interchangeable between stand-alone or card mount configurations.

1 channels, 1, 100, 50 x 17,5 x 90, 125 mA, 11 ~ 17 VDC, -5 ~ +55

1 channels, 4, 100, 50 x 17.5 x 90, 150 mA, 11 ~ 17 V DC, -5 ~ +55

Rackmount housing or standalone.

Genie’s “Smart Cabling” Active Baluns are designed for use with Category 5e Unshielded Twisted Pair (UTP) cable. Each Transmitter and Receiver is supplied with a DC12V Power supply as standard and can transmit and receive full motion composite video signals up to 900 metres in Colour and 1800 metres in Monochrome.